chevron_left chevron_right
-42%
RXm 5/40 - Single-phase VORTEX electric pump for dirty water, 1.5 HP
Flow rate up to 380 l/min (22.8 m³/h). Head up to 12.5 m. 1.1 Kw (1.5 HP) motor.
Variants: 
Buy it now and receive it between 24-12-2024 and 25-12-2024 with SDA - 2 giorni Italia
There are no reviews yet
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
RX-VORTEX pumps are suitable for draining dirty water.
The construction solutions guarantee operational safety, even in case of continuous use, thanks to the total cooling of the engine.
They are recommended for domestic use, for the evacuation of dirty water containing suspended solids.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 6.5
- Capacitor
- 25 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 380
- Min head (m.)
- 2
- Max head (m.)
- 13
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 43
- Width (cm)
- 22
- Weight kg)
- 14
- Guarantee
- 2
RXm models and performances - VORTEX
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the RX 4/40 series
Bearings
| Pump side motor bearing | 6203 ZZ - C3E |
| Opposite side engine bearing | 6203 ZZ - C3E |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 RXm 5/40 - Single-phase VORTEX electric pump for dirty water, 1.5 HPThis product Flow rate up to 380 l/min (22.8 m³/h). Head up to 12.5 m. 1.1 Kw (1.5 HP) motor. |  RXm 2/20 (10m) - Single-phase VORTEX electric pump for dirty water, 0.50 HPFlow rate up to 180 l/min (10.8 m³/h). Head up to 6.5 m. 0.37 Kw (0.5 HP) motor. 10 meters of cable with shuko plug. |  RXm 3/20 (10m) - Single-phase VORTEX electric pump for dirty water, 0.75 HPFlow rate up to 180 l/min (10.8 m³/h). Head up to 6.5 m. 0.37 Kw (0.5 HP) motor. WITH FLOAT |  RXm 4/40 - 1 HP single-phase VORTEX dirty water pumpFlow rate up to 280 l/min (16.8 m³/h). Head up to 9.5 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 1.5 | Power (HP) 0.50 | Power (HP) 0.75 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 6.5 | Absorption at 230V (A) 2.6 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 5.2 |
| Capacitor | Capacitor 25 µF450 VL | Capacitor 10 µF450 VL | Capacitor 14 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/2 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 380 | Max flow (l./min.) 180 | Max flow (l./min.) 180 | Max flow (l./min.) 280 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 3 | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 13 | Max head (m.) 7 | Max head (m.) 9 | Max head (m.) 10 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) -- | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 43 | Height (cm) 29 | Height (cm) 32 | Height (cm) 43 |
| Width (cm) | Width (cm) 22 | Width (cm) 14.7 | Width (cm) 14.7 | Width (cm) 22 |
| Weight kg) | Weight kg) 14 | Weight kg) 6.1 | Weight kg) 7.9 | Weight kg) 13 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
