chevron_left chevron_right
RX 3/20 (5m) - 0.75 HP three-phase VORTEX dirty water pump
Flow rate up to 180 l/min (10.8 m³/h). Head up to 8 m. 0.55 Kw (0.75 HP) motor.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
RX-VORTEX pumps are suitable for draining dirty water.
The construction solutions guarantee operational safety, even in case of continuous use, thanks to the total cooling of the engine.
They are recommended for domestic use, for the evacuation of dirty water containing suspended solids.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 0.75
- Absorption at 400V (A)
- 1.5
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 180
- Min head (m.)
- 3
- Max head (m.)
- 9
- Cable length (m)
- 5
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 32
- Width (cm)
- 14.7
- Weight kg)
- 7.9
- Guarantee
- 2
RX - VORTEX models and performances
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the RX 2/20 series
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R SIC |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 RX 3/20 (5m) - 0.75 HP three-phase VORTEX dirty water pumpThis product Flow rate up to 180 l/min (10.8 m³/h). Head up to 8 m. 0.55 Kw (0.75 HP) motor. |  RX 2/20 (5m) - Three-phase VORTEX dirty water pump 0.50 HPFlow rate up to 180 l/min (10.8 m³/h). Head up to 6.5 m. 0.37 Kw (0.5 HP) motor. 5 meters of cable. |  RX 4/40 - 1 HP three-phase VORTEX dirty water pumpFlow rate up to 280 l/min (16.8 m³/h). Head up to 9.5 m. 0.75 Kw (1 HP) motor. WITHOUT FLOAT |  RX 5/40 - 1.5 HP three-phase VORTEX dirty water pumpFlow rate up to 380 l/min (22.8 m³/h). Head up to 12.5 m. 1.1 Kw (1.5 HP) motor. WITHOUT FLOAT | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 0.50 | Motor power (HP) 1 | Motor power (HP) 1.5 |
| Capacitor | Capacitor -- | Capacitor -- | Capacitor 20 µF450 VL | Capacitor -- |
| Absorption at 400V (A) | Absorption at 400V (A) 1.5 | Absorption at 400V (A) 2.6 | Absorption at 400V (A) 2.1 | Absorption at 400V (A) 3.1 |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 180 | Max flow (l./min.) 180 | Max flow (l./min.) 280 | Max flow (l./min.) 380 |
| Min head (m.) | Min head (m.) 3 | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 9 | Max head (m.) 7 | Max head (m.) 10 | Max head (m.) 12.5 |
| Cable length (m) | Cable length (m) 5 | Cable length (m) 5 | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 32 | Height (cm) 29 | Height (cm) 43 | Height (cm) 43 |
| Width (cm) | Width (cm) 14.7 | Width (cm) 14.7 | Width (cm) 22 | Width (cm) 22 |
| Weight kg) | Weight kg) 7.9 | Weight kg) 6.1 | Weight kg) 12.2 | Weight kg) 13 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |