chevron_left chevron_right
RXm 4 - 1 HP single-phase clear water pump
Flow rate up to 260 l/min (15.6 m³/h). Head up to 16 m. 0.75 Kw (1 HP) motor. 10 meters of cable with shuko plug.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
RX pumps are suitable for drainage of clear water without abrasive particles.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
They are recommended for fixed installations, emergency draining of small flooded areas (rooms, basements, garages), disposal of domestic waste water from dishwashers and washing machines, emptying collection pits.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 5.4
- Capacitor
- 20 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 260
- Min head (m.)
- 4
- Max head (m.)
- 16
- Cable length (m)
- 10
- Employments
- drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 36.7
- Width (cm)
- 22
- Weight kg)
- 12.7
- Guarantee
- 2
RXm models and performance
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the RX4
Bearings
| Pump side motor bearing | 6203 ZZ - C3E |
| Opposite side engine bearing | 6203 ZZ - C3E |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 RXm 4 - 1 HP single-phase clear water pumpThis product Flow rate up to 260 l/min (15.6 m³/h). Head up to 16 m. 0.75 Kw (1 HP) motor. 10 meters of cable with shuko plug. |  RXm 2 (10m) - Single-phase clear water electric pump 0.50 HPFlow rate up to 220 l/min (13.2 m³/h). Head up to 9.5 m. 0.37 Kw (0.50 HP) motor. WITH FLOAT |  RXm 3 (10m) - Single-phase 0.75 HP clear water electric pumpFlow rate up to 220 l/min (13.2 m³/h). Head up to 12 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. WITH FLOAT |  RXm 5 - 1.5 HP single-phase clear water electric pumpFlow rate up to 300 l/min (18 m³/h). Head up to 19.5 m. 1.1 Kw (1.5 HP) motor. 10 meters of cable with shuko plug. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.50 | Motor power (HP) 0.75 | Motor power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.4 | Absorption at 230V (A) 2.0 | Absorption at 230V (A) 3.6 | Absorption at 230V (A) 7.5 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor 10 µF450 VL | Capacitor 14 µF450 VL | Capacitor 25 µF450 VL |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/2 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 260 | Max flow (l./min.) 160 | Max flow (l./min.) 220 | Max flow (l./min.) 300 |
| Min head (m.) | Min head (m.) 4 | Min head (m.) 1 | Min head (m.) 3 | Min head (m.) 5 |
| Max head (m.) | Max head (m.) 16 | Max head (m.) 7.5 | Max head (m.) 12 | Max head (m.) 20 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up | Employments drainage, drying up | Employments drainage, drying up | Employments drainage, drying up |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 36.7 | Height (cm) 25.5 | Height (cm) 28.5 | Height (cm) 36.7 |
| Width (cm) | Width (cm) 22 | Width (cm) 14.7 | Width (cm) 14.7 | Width (cm) 22 |
| Weight kg) | Weight kg) 12.7 | Weight kg) 5.8 | Weight kg) 7.2 | Weight kg) 13.7 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |