TEX 3 (10m) - 0.75 HP Drainage Pump for Dirty Water
Flow rate up to 240 l/min (14.4 m³/h). Head up to 9.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug.
The TEX 3 pump is suitable for draining dirty water that is not chemically aggressive towards the materials from which the pump is made.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
It is recommended for domestic use, for the evacuation of dirty water, emptying of tanks, domestic drains, emptying of collection pits even in the presence of suspended solid bodies up to 30 millimetres in diameter.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.75
- Capacitor
- 12.5 µF450 VL
- Delivery port
- 1 "1/4
- Impeller
- Technopolymer
- Number of impellers
- 1
- Flow rate min. (l./min.)
- 20
- Min head (m.)
- 2
- Max head (m.)
- 10
- Cable length (m)
- 10
- Employments
- slightly dirty waters, drying up, drainage
- Liquid temperature max. (° C)
- +40°C
- Height (cm)
- 31.8
- Width (cm)
- 20.5
- Weight kg)
- 6.8
- Guarantee
- 2
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TEX 3 (10m) - 0.75 HP Drainage Pump for Dirty WaterThis product Flow rate up to 240 l/min (14.4 m³/h). Head up to 9.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. |  TEX 2 (10m) - 0.50 HP Drainage Pump for Dirty WaterFlow rate up to 200 l/min (12 m³/h). Head up to 7.5 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. | |
|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 0.50 |
| Capacitor | Capacitor 12.5 µF450 VL | Capacitor 10 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Impeller | Impeller Technopolymer | Impeller Technopolymer |
| Number of impellers | Number of impellers 1 | Number of impellers 1 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) 200 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 1.5 |
| Max head (m.) | Max head (m.) 10 | Max head (m.) 8 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments slightly dirty waters, drying up, drainage | Employments slightly dirty waters, drying up, drainage |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) +40°C |
| Height (cm) | Height (cm) 31.8 | Height (cm) 31.8 |
| Width (cm) | Width (cm) 20.5 | Width (cm) 20.5 |
| Weight kg) | Weight kg) 6.8 | Weight kg) 6.1 |
| Guarantee | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Cercavo una pompa compatta per un piccolo pozzetto per raccolta delle acque meteoriche, e questa è l'unica compatta sufficientemente da starci, altreché affidabile e di ottima qualità. Sta funzionando ormai da qualche mese senza nessun problema, ovviamente.
