chevron_left chevron_right
TOP MULTI 1 - 0.50 HP Submersible Electric Pump
Flow rate up to 70 l/min (4.2 m³/h). Head up to 27 m. 0.37 Kw (0.50 HP) motor.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
The TOP MULTI 1 electric pump from Pedrollo is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to its high efficiency and reliability, it is suitable for domestic water supply from relatively deep basins, tanks or wells, for drawing rainwater from cisterns for hand watering or for feeding an irrigation system.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 2
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 75
- Min head (m.)
- 6
- Max head (m.)
- 26
- Emptying level (mm)
- 25
- Cable length (m)
- 10
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- +40°C
- Height (cm)
- 29.5
- Width (cm)
- 17
- Weight kg)
- 6.8
- Guarantee
- 2
Construction data of the TOP MULTI 1
Bearings
| Pump side motor bearing | 6201 ZZ - C3E |
| Opposite side engine bearing | 6201 ZZ - C3E |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | POM acetal resin |
| 5.4 - Stadium Containment | Reinforced technopolymer |
| 5.5 - Director Crown | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP MULTI 1 - 0.50 HP Submersible Electric PumpThis product Flow rate up to 70 l/min (4.2 m³/h). Head up to 27 m. 0.37 Kw (0.50 HP) motor. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 0.50 |
| Absorption at 230V (A) | Absorption at 230V (A) 2 |
| Capacitor | Capacitor 10 µF450 VL |
| Delivery port | Delivery port 1 "1/4 |
| Body Pump | Body Pump Technopolymer |
| Impeller | Impeller Noryl |
| Number of impellers | Number of impellers 2 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 75 |
| Min head (m.) | Min head (m.) 6 |
| Max head (m.) | Max head (m.) 26 |
| Emptying level (mm) | Emptying level (mm) 25 |
| Cable length (m) | Cable length (m) 10 |
| Employments | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C |
| Height (cm) | Height (cm) 29.5 |
| Width (cm) | Width (cm) 17 |
| Weight kg) | Weight kg) 6.8 |
| Guarantee | Guarantee 2 |
Reviews (1) - Review moderation
elettropompa usata x autoclave
perfetta , silenziosissima , ottimo prodotto e perfetta anche la vendita con spedizione ultraveloce a prezzo competitivo
By Laura M. the 07/15/2024
