TOP MULTI-TECH 2 - Multi-impeller electric pump with 0.75 HP press control
Flow rate up to 80 l/min (4.8 m³/h). Head up to 42 m. 0.55 Kw (0.75 HP) motor.
With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap.
The TOP-MULTI-TECH 2 electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to their high efficiency and reliability, they are suitable for domestic water supply from relatively deep basins, tanks or wells, for drawing rainwater from cisterns for hand watering or feeding an irrigation system, etc.
The integrated device allows you to start or stop the electric pump automatically by opening or closing the tap.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.75
- Absorption at 230V (A)
- 3.4
- Capacitor
- 12.5 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 3
- Motor shaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 80
- Min head (m.)
- 5
- Max head (m.)
- 42
- Emptying level (mm)
- 35
- Cable length (m)
- 10
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 42.8
- Width (cm)
- 17.8
- Weight kg)
- 9.5
- Guarantee
- 2
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6202 ZZ - C3 |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-13R |
| LM diameter | 13 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R SG |
| LP diameter | 12 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 1.3 - Delivery body | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | POM acetal resin |
| 5.5 - Director Crown | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP MULTI-TECH 2 - Multi-impeller electric pump with 0.75 HP press controlThis product Flow rate up to 80 l/min (4.8 m³/h). Head up to 42 m. 0.55 Kw (0.75 HP) motor. With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 3.4 |
| Capacitor | Capacitor 12.5 µF450 VL |
| Delivery port | Delivery port 1 "1/4 |
| Body Pump | Body Pump Technopolymer |
| Impeller | Impeller Noryl |
| Number of impellers | Number of impellers 3 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve Yes |
| Degree of protection | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 80 |
| Min head (m.) | Min head (m.) 5 |
| Max head (m.) | Max head (m.) 42 |
| Emptying level (mm) | Emptying level (mm) 35 |
| Cable length (m) | Cable length (m) 10 |
| Employments | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 42.8 |
| Width (cm) | Width (cm) 17.8 |
| Weight kg) | Weight kg) 9.5 |
| Guarantee | Guarantee 2 |
Reviews (1) - Review moderation
Tres bonne pompe Je la recommande Livraison ras
