chevron_left chevron_right
-42%
TOP MULTI 1-AD - 0.50 HP multi-impeller electric pump
Flow rate up to 70 l/min (4.2 m³/h). Head up to 25 m. 0.37 Kw (0.50 HP) motor.
There are no reviews yet
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
The TOP MULTI 1-AD electric pump is recommended for pumping AdBlue, DEF and Arla 32 liquids.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 0.50
- Capacitor
- 10 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 2
- Motor shaft
- AISI 431 stainless steel
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 70
- Min head (m.)
- 5
- Max head (m.)
- 25
- Cable length (m)
- 5
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 29.5
- Width (cm)
- 18
- Weight kg)
- 5.8
- Guarantee
- 2
Models and performances TOP MULTI 1-AD
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP MULTI 1-AD
Bearings
| Pump side motor bearing | 6201 ZZ - C3E |
| Opposite side engine bearing | 6201 ZZ - C3E |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R SGE |
| LP diameter | 12 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Graphite |
| LP elastomer | EPDM |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | POM acetal resin |
| 5.4 - Stadium Containment | Reinforced technopolymer |
| 5.5 - Director Crown | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP MULTI 1-AD - 0.50 HP multi-impeller electric pumpThis product Flow rate up to 70 l/min (4.2 m³/h). Head up to 25 m. 0.37 Kw (0.50 HP) motor. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 0.50 |
| Capacitor | Capacitor 10 µF450 VL |
| Delivery port | Delivery port 1 "1/4 |
| Body Pump | Body Pump Technopolymer |
| Impeller | Impeller Noryl |
| Number of impellers | Number of impellers 2 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 70 |
| Min head (m.) | Min head (m.) 5 |
| Max head (m.) | Max head (m.) 25 |
| Cable length (m) | Cable length (m) 5 |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 29.5 |
| Width (cm) | Width (cm) 18 |
| Weight kg) | Weight kg) 5.8 |
| Guarantee | Guarantee 2 |
