TOP 4 - GM - 1 HP Electric Drainage Pump for Clear Water
Flow rate up to 320 l/min (19.2 m³/h). Head up to 12.5 m. 0.75 Kw (1 HP) motor.
WITH MAGNETIC FLOAT.
The TOP-GM series is suitable for draining clear water without abrasive particles and is equipped with a magnetic float switch, which allows it to operate even in particularly restricted spaces.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
They are recommended for emergency drainage of small flooded areas (rooms, basements, garages), disposal of used domestic water (dishwashers, washing machines), emptying small collection pits.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 4.5
- Capacitor
- 16 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 260
- Min head (m.)
- 2
- Max head (m.)
- 10.5
- Cable length (m)
- 10
- Employments
- drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 33.7
- Width (cm)
- 20.4
- Weight kg)
- 10.3
- Guarantee
- 2
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP 4 - GM - 1 HP Electric Drainage Pump for Clear WaterThis product Flow rate up to 320 l/min (19.2 m³/h). Head up to 12.5 m. 0.75 Kw (1 HP) motor. WITH MAGNETIC FLOAT. |  TOP 2 - GM (10m) - 0.50 HP clear water drainage electric pumpFlow rate up to 220 l/min (13.2 m³/h). Head up to 9 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. WITH MAGNETIC FLOAT. |  TOP 3 - GM (10m) - 0.75 HP clear water drainage electric pumpFlow rate up to 260 l/min (15.6 m³/h). Head up to 10.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. WITH MAGNETIC FLOAT. |  TOP 5 - GM - 1.25 HP Clear Water Drainage PumpFlow rate up to 360 l/min (21.6 m³/h). Head up to 15 m. 0.92 Kw (1.25 HP) motor. WITH MAGNETIC FLOAT. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.50 | Motor power (HP) 0.75 | Motor power (HP) 1.25 |
| Absorption at 230V (A) | Absorption at 230V (A) 4.5 | Absorption at 230V (A) 2.0 | Absorption at 230V (A) 3.2 | Absorption at 230V (A) 5.5 |
| Capacitor | Capacitor 16 µF450 VL | Capacitor 10 µF450 VL | Capacitor 14 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/2 |
| Body Pump | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer |
| Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve Yes | Check valve no | Check valve Yes | Check valve Yes |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 260 | Max flow (l./min.) 220 | Max flow (l./min.) 260 | Max flow (l./min.) 260 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 1 | Min head (m.) 2 | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 10.5 | Max head (m.) 9 | Max head (m.) 10.5 | Max head (m.) 10.5 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up | Employments drainage, drying up | Employments drainage, drying up | Employments irrigation, drainage |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 33.7 | Height (cm) 25.7 | Height (cm) 28.7 | Height (cm) 33.7 |
| Width (cm) | Width (cm) 20.4 | Width (cm) 20 | Width (cm) 20 | Width (cm) 20.4 |
| Weight kg) | Weight kg) 10.3 | Weight kg) 5.3 | Weight kg) 6.7 | Weight kg) 11.2 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Si blocca subito appena sente due sassolini non va dovete suggerirmi una soluzione