chevron_left chevron_right
-42%
TOP 3 (10m) - 0.75 HP clear water drainage pump
Flow rate up to 260 l/min (15.6 m³/h). Head up to 10.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
The TOP series is suitable for the drainage of clear water without abrasive particles.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
They are recommended for emergency drainage of small flooded areas (rooms, basements, garages), disposal of used domestic water (dishwashers, washing machines), emptying collection pits.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.2
- Capacitor
- 14 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 260
- Min head (m.)
- 2
- Max head (m.)
- 10.5
- Cable length (m)
- 10
- Employments
- drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 28.7
- Width (cm)
- 15.2
- Weight kg)
- 6.6
- Guarantee
- 2
TOP models and performances
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP series
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP 3 (10m) - 0.75 HP clear water drainage pumpThis product Flow rate up to 260 l/min (15.6 m³/h). Head up to 10.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 3.2 |
| Capacitor | Capacitor 14 µF450 VL |
| Delivery port | Delivery port 1 "1/4 |
| Body Pump | Body Pump Technopolymer |
| Impeller | Impeller Noryl |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 260 |
| Min head (m.) | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 10.5 |
| Cable length (m) | Cable length (m) 10 |
| Employments | Employments drainage, drying up |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 28.7 |
| Width (cm) | Width (cm) 15.2 |
| Weight kg) | Weight kg) 6.6 |
| Guarantee | Guarantee 2 |
