TOP 5 - GM - 1.25 HP Clear Water Drainage Pump
Flow rate up to 360 l/min (21.6 m³/h). Head up to 15 m. 0.92 Kw (1.25 HP) motor.
WITH MAGNETIC FLOAT.
The TOP-GM series is suitable for draining clear water without abrasive particles and is equipped with a magnetic float switch, which allows it to operate even in particularly restricted spaces.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
They are recommended for emergency drainage of small flooded areas (rooms, basements, garages), disposal of used domestic water (dishwashers, washing machines), emptying small collection pits.
- Motor connection
- SINGLE PHASE
- Power (HP)
- 1.25
- Absorption at 230V (A)
- 5.5
- Capacitor
- 20 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 260
- Min head (m.)
- 2
- Max head (m.)
- 10.5
- Cable length (m)
- 10
- Employments
- irrigation, drainage
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 33.7
- Width (cm)
- 20.4
- Weight kg)
- 11.2
- Guarantee
- 2
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP 5 - GM - 1.25 HP Clear Water Drainage PumpThis product Flow rate up to 360 l/min (21.6 m³/h). Head up to 15 m. 0.92 Kw (1.25 HP) motor. WITH MAGNETIC FLOAT. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 1.25 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.5 |
| Capacitor | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/2 |
| Body Pump | Body Pump Technopolymer |
| Impeller | Impeller Noryl |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve Yes |
| Degree of protection | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 260 |
| Min head (m.) | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 10.5 |
| Cable length (m) | Cable length (m) 10 |
| Employments | Employments irrigation, drainage |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 33.7 |
| Width (cm) | Width (cm) 20.4 |
| Weight kg) | Weight kg) 11.2 |
| Guarantee | Guarantee 2 |
Reviews (1) - Review moderation
Il cliente non ha lasciato alcun commento.
