TOP 2 - VORTEX/GM (5m) - 0.50 HP electric drainage pump for dirty water
Flow rate up to 180 l/min (10.8 m³/h). Head up to 7 m. 0.37 Kw (0.5 HP) motor. 5 meters of cable with shuko plug.
The TOP-VORTEX/GM pump is suitable for draining dirty water and is equipped with a magnetic float switch, which allows it to operate even in particularly restricted spaces.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
It is recommended for domestic use, for the evacuation of dirty water, emptying tanks, domestic drains, emptying small collection pits, even in the presence of suspended solid bodies of up to Ø 20 mm.
- Motor connection
- SINGLE PHASE
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2.0
- Capacitor
- 10 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 180
- Min head (m.)
- 1.5
- Max head (m.)
- 7
- Cable length (m)
- 10
- Employments
- drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 20
- Width (cm)
- 15.2
- Weight kg)
- 5.3
- Guarantee
- 2
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP 2 - VORTEX/GM (5m) - 0.50 HP electric drainage pump for dirty waterThis product Flow rate up to 180 l/min (10.8 m³/h). Head up to 7 m. 0.37 Kw (0.5 HP) motor. 5 meters of cable with shuko plug. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 0.50 |
| Absorption at 230V (A) | Absorption at 230V (A) 2.0 |
| Capacitor | Capacitor 10 µF450 VL |
| Delivery port | Delivery port 1 "1/4 |
| Body Pump | Body Pump Technopolymer |
| Impeller | Impeller Technopolymer |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 180 |
| Min head (m.) | Min head (m.) 1.5 |
| Max head (m.) | Max head (m.) 7 |
| Cable length (m) | Cable length (m) 10 |
| Employments | Employments drainage, drying up |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 20 |
| Width (cm) | Width (cm) 15.2 |
| Weight kg) | Weight kg) 5.3 |
| Guarantee | Guarantee 2 |
Reviews (5) - Review moderation
Funcionamiento correcto, lo que estaba buscando y el servicio de envío y compra muy bueno, todo muy bien es muy recomendable
Livraison conforme et rapide Bon produit
Produit parfaitement conforme , prix correct etlivraison très rapide avec TNT Emballage résistant et sûr. Très satisfait.
El cliente no ha dejado ningún comentario.
J'ai bien reçu la commande mais j'avais commandé avec un câble de 10m que j'ai payé plus cher et j'ai reçu un pompe avec un câble de 5 m.
