TOP 2 - FLOOR (5m) - 0.50 HP electric drainage pump for clear water
Flow rate up to 150 l/min (9.0 m³/h). Head up to 8.5 m. 0.37 kW (0.50 HP) motor. 5-meter cable with Schuko plug.
Delivery Options
| Carrier | Description | Estimated Delivery | |
|---|---|---|---|
 | Mail Boxes - 2 giorni | This courier delivers within 48 hours from the moment we entrust the products to him. | Wednesday 21 October - Thursday 22 October |
 | Poste Italiane - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust them with the products. | Wednesday 21 October - Thursday 22 October |
 | Poste Italiane - 3 giorni punto di ritiro | This courier delivers within 24/72 hours from the moment we entrust them with the products. | Wednesday 21 October |
Carrier: Mail Boxes - 2 giorni
Description: This courier delivers within 48 hours from the moment we entrust the products to him.
Estimated delivery:
Wednesday 21 October - Thursday 22 October
Carrier: Poste Italiane - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust them with the products.
Estimated delivery:
Wednesday 21 October - Thursday 22 October
Carrier: Poste Italiane - 3 giorni punto di ritiro
Description: This courier delivers within 24/72 hours from the moment we entrust them with the products.
Estimated delivery:
Wednesday 21 October
The TOP 2 - FLOOR submersible electric pump from the TOP-FLOOR series by Pedrollo is among the best in the submersible drainage category.
Thanks to its ability to suck water up to 2 millimetres from the bottom, it is suitable for emergency domestic use in small flooded rooms and in all those applications where maximum levels of drainage are required.
It allows the passage of suspended solids up to 2 millimetres in diameter.
It can be installed up to 3 meters below the water level.
To create the TOP 2 - FLOOR, Pedrollo used a mix of technopolymer, noryl and stainless steel which give solidity and robustness.
- Jobs
- drainage, drying up
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF 450 VL
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- Yes
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 150
- Min. head (m.)
- 2.4
- Max. head (m.)
- 8.5
- Max. liquid temperature (°C)
- +40°C
- Degree of protection
- IP 68
- Delivery mouth
- 1" 1/4
- Height (cm)
- 25.7
- Width (cm)
- 15.2
- Weight (Kg)
- 5.2
- Warranty (years)
- 2
Use and formulation of products
- Jobs
- drainage, drying up
Engine and mechanical performance
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF 450 VL
Pump components and construction
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- Yes
Hydraulic performance and filtration
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 150
- Min. head (m.)
- 2.4
- Max. head (m.)
- 8.5
Liquids and pumping conditions
- Max. liquid temperature (°C)
- +40°C
Safety and protection
- Degree of protection
- IP 68
Installation and connections
- Delivery mouth
- 1" 1/4
Dimensions and weight
- Height (cm)
- 25.7
- Width (cm)
- 15.2
- Weight (Kg)
- 5.2
Packaging, maintenance, and warranty
- Warranty (years)
- 2
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP 2 - FLOOR (5m) - 0.50 HP electric drainage pump for clear waterThis product Flow rate up to 150 l/min (9.0 m³/h). Head up to 8.5 m. 0.37 kW (0.50 HP) motor. 5-meter cable with Schuko plug. |  TOP 1 - FLOOR (5m) - 0.33 HP clear water drainage pump Flow rate up to 120 l/min (7.2 m³/h). Head up to 6.5 m. 0.25 kW (0.33 HP) motor. 5-meter cable with Schuko plug. | |
|---|---|---|
| Price | Price €220.82 -42% €128.08 | Price €215.94 -42% €125.25 |
| Jobs | Jobs drainage, drying up | Jobs drainage, drying up |
| Motor connection | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE |
| Power (HP) | Power (HP) 0.50 | Power (HP) 0.33 |
| Absorption at 230V (A) | Absorption at 230V (A) 2 | Absorption at 230V (A) 1.5 |
| Capacitor | Capacitor 10 µF 450 VL | Capacitor 10 µF 450 VL |
| Pump body | Pump body Technopolymer | Pump body Technopolymer |
| Impeller | Impeller Noryl | Impeller Noryl |
| Number of impellers | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel |
| Check valve | Check valve Yes | Check valve No |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 20 | Minimum flow rate (l./min.) 20 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 150 | Max. flow rate (l./min.) 120 |
| Min. head (m.) | Min. head (m.) 2.4 | Min. head (m.) 2 |
| Max. head (m.) | Max. head (m.) 8.5 | Max. head (m.) 6.5 |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C |
| Cable length (m.) | Cable length (m.) -- | Cable length (m.) 5 |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 |
| Delivery mouth | Delivery mouth 1" 1/4 | Delivery mouth 1" 1/4 |
| Height (cm) | Height (cm) 25.7 | Height (cm) 25.7 |
| Width (cm) | Width (cm) 15.2 | Width (cm) 15.2 |
| Weight (Kg) | Weight (Kg) 5.2 | Weight (Kg) 5.1 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 |
