VX 8/50-N (5m) - 0.75 HP three-phase VORTEX electric pump for waste water
Flow rate up to 450 l/min (27 m³/h). Head up to 6.5 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable.
It is recommended for domestic, civil and industrial use, in all cases where suspended solids of up to Ø 40 mm are present in the water, for example groundwater, surface water, sewage and loaded water.
Its use is recommended for draining flooded areas, such as basements, underground car parks, car wash areas, for domestic waste water, emptying cesspits, and disposing of sewage.
This pump stands out for its reliability, especially in fixed installations with automatic operation.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 0.75
- Absorption at 400V (A)
- 1.8
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- Technopolymer
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 450
- Min head (m.)
- 1.5
- Max head (m.)
- 6.5
- Cable length (m)
- 5
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 43.1
- Width (cm)
- 23.4
- Weight kg)
- 13.1
|
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
VX 8/50-N (5m) - 0.75 HP three-phase VORTEX electric pump for waste waterThis product Flow rate up to 450 l/min (27 m³/h). Head up to 6.5 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable. | VX 15/35-N - 1.5 HP three-phase VORTEX electric pump for waste waterFlow rate up to 500 l/min (30 m³/h). Head up to 14 m. 1.1 Kw (1.5 HP) motor. | VX 10/50-N (5m) - 1 HP three-phase VORTEX electric pump for waste waterFlow rate up to 550 l/min (33 m³/h). Head up to 9 m. 0.75 Kw (1 HP) motor. 5 meters of cable. | VX 15/50-N - 1.5 HP three-phase VORTEX electric pump for waste waterFlow rate up to 650 l/min (39 m³/h). Head up to 11.5 m. 1.1 Kw (1.5 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 1.5 | Motor power (HP) 1 | Motor power (HP) 1.5 |
Absorption at 400V (A) | Absorption at 400V (A) 1.8 | Absorption at 400V (A) 3.0 | Absorption at 400V (A) 4.8 | Absorption at 400V (A) 3.0 |
Delivery port | Delivery port 2" | Delivery port 1 "1/2 | Delivery port 2" | Delivery port 2" |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Technopolymer | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers -- | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
Max flow (l./min.) | Max flow (l./min.) 450 | Max flow (l./min.) 500 | Max flow (l./min.) 550 | Max flow (l./min.) 650 |
Min head (m.) | Min head (m.) 1.5 | Min head (m.) 2 | Min head (m.) 1.5 | Min head (m.) 4 |
Max head (m.) | Max head (m.) 6.5 | Max head (m.) 15 | Max head (m.) 10 | Max head (m.) 13.5 |
Cable length (m) | Cable length (m) 5 | Cable length (m) 10 | Cable length (m) 5 | Cable length (m) 10 |
Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 43.1 | Height (cm) 42.1 | Height (cm) 43.1 | Height (cm) 44.6 |
Width (cm) | Width (cm) 23.4 | Width (cm) 24.3 | Width (cm) 24.3 | Width (cm) 24.3 |
Weight kg) | Weight kg) 13.1 | Weight kg) 14.7 | Weight kg) 13.1 | Weight kg) 15.2 |
Guarantee | Guarantee -- | Guarantee 2 | Guarantee 2 | Guarantee 2 |