chevron_left chevron_right
-42%
VXCm 15/35 - Single-phase VORTEX electric pump for waste water, 1.5 HP
Flow rate up to 500 l/min (35 m³/h). Head up to 13.5 m. 1.1 Kw (1.5 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
New version of the VXC series completely designed and made even more reliable with the introduction of the double mechanical seal and the cataphoresis treatment of all cast iron parts.
This treatment guarantees high resistance to oxidation.
The VXC series pumps, built in cast iron of considerable thickness, exceptional strength and resistance to abrasion, are equipped with a VORTEX type impeller.
They are recommended for the drainage of water containing suspended solids, sewage, waste water and water mixed with mud.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 7.4
- Capacitor
- 25 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 35
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 500
- Min head (m.)
- 2
- Max head (m.)
- 14
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- +40°C
- Height (cm)
- 40.3
- Weight kg)
- 19.4
- Guarantee
- 2
Models and performances VXCm 35-45
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VXC series
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 VXCm 15/35 - Single-phase VORTEX electric pump for waste water, 1.5 HPThis product Flow rate up to 500 l/min (35 m³/h). Head up to 13.5 m. 1.1 Kw (1.5 HP) motor. |  VXCm 10/35 - Single-phase VORTEX electric pump for waste water, 1 HPFlow rate up to 400 l/min (24 m³/h). Head up to 10 m. 0.75 Kw (1 HP) motor. |  VXCm 8/45 - Single-phase VORTEX electric pump for sewage water, 0.75 HPFlow rate up to 450 l/min (27 m³/h). Head up to 6 m. 0.55 Kw (0.75 HP) motor. |  VXCm 10/45 - 1 HP single-phase VORTEX electric pump for sewage waterFlow rate up to 550 l/min (33 m³/h). Head up to 8.5 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1 | Power (HP) 0.75 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 7.4 | Absorption at 230V (A) 4.8 | Absorption at 230V (A) 3.7 | Absorption at 230V (A) 5 |
| Capacitor | Capacitor 25 µF450 VL | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL | Capacitor -- |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 2" |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 35 | Number of impellers 35 | Number of impellers 45 | Number of impellers 45 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 500 | Max flow (l./min.) 400 | Max flow (l./min.) 450 | Max flow (l./min.) 550 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 1.5 | Min head (m.) 1.5 |
| Max head (m.) | Max head (m.) 14 | Max head (m.) 11 | Max head (m.) 6.5 | Max head (m.) 9 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments -- | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) +40°C |
| Height (cm) | Height (cm) 40.3 | Height (cm) 38.8 | Height (cm) 41.3 | Height (cm) 41.3 |
| Weight kg) | Weight kg) 19.4 | Weight kg) 17.8 | Weight kg) 17.5 | Weight kg) 18.3 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
