chevron_left chevron_right
VXC 15/45 - 1.5 HP three-phase VORTEX electric pump for waste water
Flow rate up to 650 l/min (39 m³/h). Head up to 11 m. 1.1 Kw (1.5 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
New version of the VXC series completely designed and made even more reliable with the introduction of the double mechanical seal and the cataphoresis treatment of all cast iron parts.
This treatment guarantees high resistance to oxidation.
The VXC series pumps, built in cast iron of considerable thickness, exceptional strength and resistance to abrasion, are equipped with a VORTEX type impeller.
They are recommended for the drainage of water containing suspended solids, sewage, waste water and water mixed with mud.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- 5.2
- Absorption at 400V (A)
- 3
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 45
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 650
- Min head (m.)
- 2
- Max head (m.)
- 11.5
- Liquid temperature max. (° C)
- 40, +40°C
- Height (cm)
- 42.8
- Weight kg)
- 18.9
- Guarantee
- 2
VXC 35-45 models and performances
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VXC series
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 VXC 15/45 - 1.5 HP three-phase VORTEX electric pump for waste waterThis product Flow rate up to 650 l/min (39 m³/h). Head up to 11 m. 1.1 Kw (1.5 HP) motor. |  VXC 10/45 - 1 HP three-phase VORTEX electric pump for waste waterFlow rate up to 550 l/min (33 m³/h). Head up to 8.5 m. 0.75 Kw (1 HP) motor. |  VXC 15/50 - 1.5 HP three-phase VORTEX electric pump for waste waterFlow rate up to 600 l/min (36 m³/h). Head up to 10.5 m. 1.1 Kw (1.5 HP) motor. |  VXC 15/65 - 1.5 HP three-phase VORTEX electric pump for waste waterFlow rate up to 850 l/min (51 m³/h). Head up to 5.5 m. 1.1 Kw (1.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1 | Motor power (HP) 1.5 | Motor power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.2 | Absorption at 230V (A) 3.5 | Absorption at 230V (A) 5.9 | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 3 | Absorption at 400V (A) 2 | Absorption at 400V (A) 3.4 | Absorption at 400V (A) -- |
| Delivery port | Delivery port 2" | Delivery port 2" | Delivery port 2 "1/2 | Delivery port -- |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump -- |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller Cast iron | Impeller -- |
| Number of impellers | Number of impellers 45 | Number of impellers 45 | Number of impellers 50 | Number of impellers -- |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 650 | Max flow (l./min.) 550 | Max flow (l./min.) 600 | Max flow (l./min.) 850 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 1.5 | Min head (m.) 2.5 | Min head (m.) -- |
| Max head (m.) | Max head (m.) 11.5 | Max head (m.) 9 | Max head (m.) 12 | Max head (m.) 5.5 |
| Cable length (m) | Cable length (m) -- | Cable length (m) -- | Cable length (m) 10 | Cable length (m) -- |
| Employments | Employments -- | Employments -- | Employments drainage, drying up, slightly dirty waters | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40, +40°C | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) +40°C |
| Height (cm) | Height (cm) 42.8 | Height (cm) 41.3 | Height (cm) 48.7 | Height (cm) -- |
| Weight kg) | Weight kg) 18.9 | Weight kg) 17.2 | Weight kg) 34.9 | Weight kg) 37.7 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee -- |
