ZXm 2/40-GM (5m) - VORTEX submersible electric pump for dirty water 0.75 HP
Flow rate up to 400 l/min (24 m³/h). Head up to 11.5 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable with shuko plug.
WITH MAGNETIC FLOAT
The ZXm 2/40-GM pump is recommended for drainage of waste water in the domestic sector, for the evacuation of dirty water, even in the presence of suspended solids with dimensions up to Ø 40 mm.
It stands out for its ease of installation and reliability in fixed installations with automatic operation.
- Motor connection
- SINGLE PHASE
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 4
- Capacitor
- 20 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- Technopolymer
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 25
- Max flow (l./min.)
- 400
- Min head (m.)
- 2
- Max head (m.)
- 11.5
- Cable length (m)
- 5
- Employments
- slightly dirty waters
- Liquid temperature max. (° C)
- +40°C
- Height (cm)
- 42.2
- Width (cm)
- 17.1
- Weight kg)
- 10.8
- Guarantee
- 2
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 ZXm 2/40-GM (5m) - VORTEX submersible electric pump for dirty water 0.75 HPThis product Flow rate up to 400 l/min (24 m³/h). Head up to 11.5 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable with shuko plug. WITH MAGNETIC FLOAT |  ZXm 2/30-GM (5m) - VORTEX submersible electric pump for dirty water 0.75 HPFlow rate up to 320 l/min (19.2 m³/h). Head up to 13 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable with shuko plug. WITH MAGNETIC FLOAT | |
|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 0.75 | Power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 4 | Absorption at 230V (A) 4 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
| Body Pump | Body Pump Technopolymer | Body Pump Technopolymer |
| Impeller | Impeller Technopolymer | Impeller Technopolymer |
| Number of impellers | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 |
| Max flow (l./min.) | Max flow (l./min.) 400 | Max flow (l./min.) 320 |
| Min head (m.) | Min head (m.) 2 | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 11.5 | Max head (m.) 13 |
| Cable length (m) | Cable length (m) 5 | Cable length (m) 5 |
| Employments | Employments slightly dirty waters | Employments slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) +40°C |
| Height (cm) | Height (cm) 42.2 | Height (cm) 41.2 |
| Width (cm) | Width (cm) 17.1 | Width (cm) 17.1 |
| Weight kg) | Weight kg) 10.8 | Weight kg) 10.8 |
| Guarantee | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Ne abbiamo installate 4 nel condominio, usate come impianto risalita acque piovane. Come portata sono fantastiche. Svuotano i pozzetti in un batter d'occhio portando 5-6m più in alto le acque nelle fognature comunali. Le abbiamo prese per un impianto comandato da quadro elettrico per il funzionamento in alternanza e con galleggianti ad hoc (bypassato il galleggiante di serie). Darei 5 stelle ma son costretto a toglierne una perché di tanto in tanto il galleggiante magnetico di serie non chiamava la pompa nonostante fosse in alto. I primi giorni infatti senza quadro lo notavamo su 4 pompe su 4. Nel nostro caso nessun problema ma se fosse stato per un "uso di serie" ahi ahi ahi...
