4BLOCKm 4/13 (30m) - Submersible single-phase pump 1.5 HP
Flow rate up to 100 l / min (6 m³ / h). Head up to 97 m. 1.1 Kw (1.5 HP) engine. 30 meters of cable.
Monobloc submersible electric pump in stainless steel ready to install.
It is complete with: condenser, built-in thermal overload protector and 20 meter power cable.
The PEDROLLO 4BLOCKm 4/13 has a flow rate that varies from 20 to 100 liters per minute with a prevalence from 32.5 to 97 meters.
It is recommended for supplying clean water from wells even in the presence of sand (up to 150 g / m³).
Due to its high performance and reliability it is recommended for use in the domestic sector, for the automatic distribution of water in conjunction with autoclaves, for irrigation, etc.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- 8
- Capacitor
- 35 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Lexan
- Number of impellers
- 13
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 100
- Min head (m.)
- 32.5
- Max head (m.)
- 97
- Cable length (m)
- 20
- Employments
- irrigation
- Liquid temperature max. (° C)
- 35
- Height (cm)
- 92.5
- Outside diameter (cm)
- 10
- Weight kg)
- 17
- Guarantee
- 2
|
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 |
Opposite side engine bearing | 6203 |
Tree holding
Type of seal | Single Mechanical Seal in oil chamber |
Engine side model | ST1-16 |
LM diameter | 16 |
LM fixed ring | Ceramic |
LM rotating ring | Graphite |
LM elastomer | NBR |
Materials
1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
2.1 - Seal holder cover | Brass CW617N EN 12165 |
3.0 - Impeller | POM acetal resin |
4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
5.1 - Diffuser | Reinforced technopolymer |
6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
7.0 - Lantern | Reinforced technopolymer |
7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
4BLOCKm 4/13 (30m) - Submersible single-phase pump 1.5 HPThis product Flow rate up to 100 l / min (6 m³ / h). Head up to 97 m. 1.1 Kw (1.5 HP) engine. 30 meters of cable. | 4BLOCKm 4/8 (30m) - 1 HP single-phase submersible pumpFlow rate up to 100 l / min (6 m³ / h). Head up to 59.5 m. 0.75 Kw (1 HP) motor. 30 meters of cable. | 4BLOCKm 6/3 (30m) - 0.50 HP single-phase submersible pumpFlow rate up to 150 l / min (9 m³ / h). Head up to 19 m. 0.55 Kw (0.75 HP) motor. 30 meters of cable. | 4BLOCKm 6/5 (30m) - 0.75 HP single-phase submersible pumpFlow rate up to 150 l / min (9 m³ / h). Head up to 31.5 m. 0.55 Kw (0.75 HP) motor. 30 meters of cable. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1 | Motor power (HP) 0.75 | Motor power (HP) 0.75 |
Absorption at 230V (A) | Absorption at 230V (A) 8 | Absorption at 230V (A) 6 | Absorption at 230V (A) 5 | Absorption at 230V (A) 5 |
Capacitor | Capacitor 35 µF450 VL | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL |
Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
Impeller | Impeller Lexan | Impeller Delrin | Impeller Delrin | Impeller Delrin |
Number of impellers | Number of impellers 13 | Number of impellers 8 | Number of impellers 3 | Number of impellers 5 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- | Motor shaft -- | Motor shaft -- |
Pump shaft | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 |
Max flow (l./min.) | Max flow (l./min.) 100 | Max flow (l./min.) 100 | Max flow (l./min.) 150 | Max flow (l./min.) 150 |
Min head (m.) | Min head (m.) 32.5 | Min head (m.) 20 | Min head (m.) 6 | Min head (m.) 10 |
Max head (m.) | Max head (m.) 97 | Max head (m.) 59.5 | Max head (m.) 19 | Max head (m.) 32.5 |
Cable length (m) | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 30 | Cable length (m) 20 |
Employments | Employments irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) +35°C |
Height (cm) | Height (cm) 92.5 | Height (cm) 74.3 | Height (cm) 64.1 | Height (cm) 63.5 |
Outside diameter (cm) | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 |
Weight kg) | Weight kg) 17 | Weight kg) 13.8 | Weight kg) 10.7 | Weight kg) 11.8 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |