4BLOCKm 2/18 (20m) - 1.5 HP single-phase submersible pump
Flow rate up to 60 l / min (3.6 m³ / h). Head up to 135 m. 1.1 Kw (1.5 HP) engine. 20 meters of cable.
Buy it now and receive it between 26-11-2024 and 27-11-2024 with SDA - 2 giorni Italia
Monobloc submersible electric pump in stainless steel ready to install.
It is complete with: condenser, built-in thermal overload protector and 20 meter power cable.
The PEDROLLO 4BLOCKm 2/18 has a flow rate that varies from 10 to 60 liters per minute with a prevalence from 53.5 to 135 meters.
It is recommended for supplying clean water from wells even in the presence of sand (up to 150 g / m³).
Due to its high performance and reliability it is recommended for use in the domestic sector, for the automatic distribution of water in conjunction with autoclaves, for irrigation, etc.
- Absorption at 230V (A)
- 8
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 60
- Min head (m.)
- 53.5
- Max head (m.)
- 135
- Cable length (m)
- 20
- Liquid temperature max. (° C)
- 35
- Height (cm)
- 98.6
- Outside diameter (cm)
- 10
- Weight kg)
- 10
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4BLOCKm 2/18 (20m) - 1.5 HP single-phase submersible pumpThis product Flow rate up to 60 l / min (3.6 m³ / h). Head up to 135 m. 1.1 Kw (1.5 HP) engine. 20 meters of cable. |  4BLOCKm 2/12 (20m) - 1 HP single-phase submersible pumpFlow rate up to 60 l / min (3.6 m³ / h). Head up to 90 m. 0.75 Kw (1 HP) motor. 20 meters of cable. |  4BLOCKm 4/4 (20m) - 0.50 HP single-phase submersible pumpFlow rate up to 100 l / min (6 m³ / h). Head up to 30 m. 0.37 Kw (0.50 HP) motor. 20 meters of cable. |  4BLOCKm 4/6 (20m) - 0.75 HP single-phase submersible pumpFlow rate up to 100 l / min (6 m³ / h). Head up to 44.5 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable. | |
|---|---|---|---|---|
| Motor connection | Motor connection -- | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) -- | Motor power (HP) 1 | Motor power (HP) 0.50 | Motor power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 8 | Absorption at 230V (A) 6 | Absorption at 230V (A) 5 | Absorption at 230V (A) 5 |
| Capacitor | Capacitor -- | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port -- | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump -- | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller -- | Impeller Delrin | Impeller Lexan | Impeller Lexan |
| Number of impellers | Number of impellers -- | Number of impellers 12 | Number of impellers 4 | Number of impellers 6 |
| Pump shaft | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve -- | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection -- | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 60 | Max flow (l./min.) 60 | Max flow (l./min.) 100 | Max flow (l./min.) 100 |
| Min head (m.) | Min head (m.) 53.5 | Min head (m.) 35.5 | Min head (m.) 10 | Min head (m.) 15 |
| Max head (m.) | Max head (m.) 135 | Max head (m.) 90 | Max head (m.) 30 | Max head (m.) 44.5 |
| Cable length (m) | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 |
| Employments | Employments -- | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 |
| Height (cm) | Height (cm) 98.6 | Height (cm) 78.6 | Height (cm) 67.4 | Height (cm) 67.4 |
| Outside diameter (cm) | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10.1 | Outside diameter (cm) 10.1 |
| Weight kg) | Weight kg) 10 | Weight kg) 14.3 | Weight kg) 12.1 | Weight kg) 12.1 |
| Guarantee | Guarantee -- | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Related Products
-
Brio Top 2.0 - Electronic...
For pumps up to 3 HP. With 1" male connection. With pressure gauge. With auto reset.
€105.69Restart pressure (bar) from 0.5 to 8 bar Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male -
PRESFLO MULTI - Electronic...
For pumps up to 2 HP. Inlet port 1" M. Outlet port 1" F . Without pressure gauge. With...
€223.26Restart pressure (bar) 2 bars Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male Female