4SR 4/72 S-PD - 10 HP three-phase submersible electric pump
Flow rate up to 100 l/min (6.0 m³/h). Head up to 576 m. 7.5 Kw (10 HP) motor.
The 4SR 4/72 S-PD electric pump by Pedrollo is suitable for use in the domestic, civil and agricultural sectors.
Pedrollo has created this pump with the aim of producing a product that is efficient in terms of operation and robust in terms of construction.
The 4SR 4/72 S-PD has a refined hydraulic design that guarantees exceptional performance and efficiency and considerable resistance to wear caused by the presence of sand in the water. Its construction allows the pumping of water with sand content of up to 200 grams per cubic meter.
Equipped with an innovative patented inductor that guarantees a high priming capacity for operation in wells with the presence of gas or air mixed in the water.
It can be used for water distribution in conjunction with pressure tanks, for irrigation, for washing systems, for pressure boosting.
The 4SR 4/72 S-PD can be installed in all wells with a diameter of at least 4 inches, i.e. 100 millimeters. It can be lowered into a well up to 200 meters underground.
It has a flow rate that varies from 20 to 100 litres per minute with a head from 202 to 576 metres.
It must be powered by a three-phase voltage and has a horsepower of 10 HP.
The 4SR 4/72 S-PD has the body and pump shaft made of AISI 304 stainless steel and the impeller is in noryl, these materials ensure that the pump is robust and resistant.
The 3.6 meter long power cable and capacitor are supplied.
- Motor connection
- THREE-PHASE
- Motor power (Kw)
- 7.5
- Motor power (HP)
- 10
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 72
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 30
- Min head (m.)
- 127
- Max head (m.)
- 271
- Cable length (m)
- 2
- Employments
- irrigation
- Motor voltage
- 400 V
- Height (cm)
- Weight kg)
- 24
- Diameter (cm)
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4SR 4/72 S-PD - 10 HP three-phase submersible electric pumpThis product Flow rate up to 100 l/min (6.0 m³/h). Head up to 576 m. 7.5 Kw (10 HP) motor. |  4SR 4/30 S-PD - 4 HP three-phase electric submersible pumpFlow rate up to 100 l/min (6 m³/h). Head up to 228 metres. 3 Kw (4 HP) motor. |  4SR 4/40 S-PD - 5.5 HP three-phase electric submersible pumpFlow rate up to 100 l/min (6 m³/h). Head up to 304 metres. 4 Kw (5.5 HP) motor. |  4SR 4/54 S-PD - 7.5 HP three-phase electric submersible pumpFlow rate up to 100 l/min (6 m³/h). Head up to 410 metres. 5.5 kW (7.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (Kw) | Motor power (Kw) 7.5 | Motor power (Kw) -- | Motor power (Kw) -- | Motor power (Kw) -- |
| Motor power (HP) | Motor power (HP) 10 | Motor power (HP) 4 | Motor power (HP) 5.5 | Motor power (HP) 7.5 |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump -- | Body Pump -- | Body Pump -- |
| Impeller | Impeller Noryl | Impeller -- | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 72 | Number of impellers -- | Number of impellers -- | Number of impellers -- |
| Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft -- | Motor shaft -- | Motor shaft -- |
| Check valve | Check valve no | Check valve -- | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 30 | Max flow (l./min.) 100 | Max flow (l./min.) 100 | Max flow (l./min.) 100 |
| Min head (m.) | Min head (m.) 127 | Min head (m.) 84 | Min head (m.) 112 | Min head (m.) 151 |
| Max head (m.) | Max head (m.) 271 | Max head (m.) 228 | Max head (m.) 304 | Max head (m.) 410 |
| Cable length (m) | Cable length (m) 2 | Cable length (m) 2 | Cable length (m) 2 | Cable length (m) 2 |
| Employments | Employments irrigation | Employments irrigation | Employments irrigation | Employments irrigation |
| Motor voltage | Motor voltage 400 V | Motor voltage -- | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) -- | Height (cm) -- | Height (cm) -- | Height (cm) -- |
| Weight kg) | Weight kg) 24 | Weight kg) 24 | Weight kg) 32 | Weight kg) 39 |
| Diameter (cm) | Diameter (cm) -- | Diameter (cm) -- | Diameter (cm) -- | Diameter (cm) -- |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
