4SRm 6/6 S-PS - 1 HP single-phase submersible electric pump
Flow rate up to 150 l/min (9 m³/h). Head up to 38 metres. 0.75 kW (1 HP) motor.
The PEDROLLO 4SRm 6/6 S-PS is recommended for pumping clean water with a sand content not exceeding 150 g/m³.
It has a flow rate that varies from 25 to 150 liters per minute with a head from 14.5 to 38 metres.
Due to its high efficiency and reliability, it is suitable for use in the domestic, civil and industrial fields, for the distribution of water coupled with autoclaves, for the irrigation of vegetable gardens and gardens, for washing systems, for increasing pressure or for fire extinguishing systems.
Submersible electric pump with encapsulated PEDROLLO motor.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Delivery port
- 2"
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 25
- Max flow (l./min.)
- 150
- Min head (m.)
- 14.5
- Max head (m.)
- 38
- Cable length (m)
- 2
- Weight kg)
- 12
- Guarantee
- 2
|
|
|
|
|
|
Bearings
Pump bearing - fixed part | Anti-friction polymer |
Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
5.1 - Diffuser | Reinforced technopolymer |
7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |