4SR 2/58 S-PS - 5.5 HP three-phase submersible electric pump
Flow rate up to 65 l/min (1.8 m³/h). Head up to 452 m. 4 Kw (5.5 HP) motor.
The 4SR 2/58 S-PS electric pump by Pedrollo is suitable for use in the domestic, civil and agricultural sectors.
Pedrollo has created this pump with the aim of producing a product that is efficient in terms of operation and robust in terms of construction.
The 4SR 2/58 S-PS has a refined hydraulic design that guarantees exceptional performance and efficiency and considerable resistance to wear caused by the presence of sand in the water. Its construction allows the pumping of water with sand content of up to 200 grams per cubic meter.
Equipped with an innovative patented inductor that guarantees a high priming capacity for operation in wells with the presence of gas or air mixed in the water.
It can be used for water distribution in conjunction with pressure tanks, for irrigation, for washing systems, for pressure boosting.
The 4SR 2/58 S-PS can be installed in all wells with a diameter of at least 4 inches, i.e. 100 millimeters. It can be lowered into a well up to 300 meters underground.
It must be powered by a single-phase voltage and has a horsepower of 5.5 HP.
The 4SR 2/58 S-PS has the body and pump shaft made of AISI 304 stainless steel and the impeller is in noryl, these materials ensure that the pump is robust and resistant.
The 3.6 meter long power cable and capacitor are supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 58
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 30
- Min head (m.)
- 127
- Max head (m.)
- 271
- Cable length (m)
- 2
- Employments
- irrigation
- Motor voltage
- 400 V
- Height (cm)
- Weight kg)
- 24
- Diameter (cm)
- Guarantee
- 2
