6SR36/7 - PD - 10 HP three-phase submersible electric pump
Flow rate up to 800 l/min (48 m³/h). Head up to 87 m. 7.5 Kw (10 HP) motor.
The 6SR36/7 - PD electric pump by Pedrollo is suitable for use in the civil and agricultural sectors, in particular for diversified applications such as industrial, municipal and agricultural water needs, for the distribution of water in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
The special feature of this pump is the construction of the impellers and diffusers made in such a way as to resist abrasion caused by sand. The pump allows the pumping of water with sand content up to 100 grams per cubic meter.
The 6SR36/7 - PD can be housed in wells with diameters greater than 6 inches.
It is equipped with a rewindable oil-bath PD motor which allows it to be installed up to 200 metres underground.
The flow rate varies from 100 to 800 litres per minute with a head from 274 to 92 metres.
The 6SR36/7 - PD must be powered by a three-phase voltage, has a horsepower of 10 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The pump is made of a mix of cast iron, AISI 304 stainless steel and noryl. Pedrollo has used this mix of materials to create a robust product that resists work and wear.
The 4-meter long power cable is supplied.
- Motor connection
- THREE-PHASE
- Motor power (Kw)
- 7.5
- Motor power (HP)
- 10
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 7
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 800
- Min head (m.)
- 20
- Max head (m.)
- 70
- Cable length (m)
- Employments
- fire prevention systems, irrigation, pressurization systems, water supply
- Liquid temperature max. (° C)
- +35°C
- Height (cm)
- 167.4
- Outside diameter (cm)
- 149.5
- Weight kg)
- 64
- Guarantee
- 2
|
|
|
|
|
|
Bearings
Pump bearing - fixed part | Anti-friction polymer |
Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
1.3 - Delivery body | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
4.2 - Towing joint | Stainless steel EN 1.4021 (AISI 420) |
5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
5.1 - Diffuser | Reinforced technopolymer |
7.0 - Lantern | Cast iron GJL 200 EN 1561 |
7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
6SR36/7 - PD - 10 HP three-phase submersible electric pumpThis product Flow rate up to 800 l/min (48 m³/h). Head up to 87 m. 7.5 Kw (10 HP) motor. | 6SR36/6 - PD - submersible electric Pump three-phase: 7.5 HPFlow rate up to 800 l/min (48 m3/h). Prevalence of up to 67 m. Motors from 5.5 Kw (7.5 HP). | 6SR36/9 - PD - 12.5 HP three-phase submersible electric pumpFlow rate up to 800 l/min (48 m³/h). Head up to 112 m. 9.2 Kw (12.5 HP) motor. | 6SR36/11 - PD - submersible electric Pump three phase 15 HPFlow rate up to 800 l/min (48 m3/h). Head up to 123 m. Motors from 11 Kw (15 HP). | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (Kw) | Motor power (Kw) 7.5 | Motor power (Kw) -- | Motor power (Kw) 9.2 | Motor power (Kw) -- |
Motor power (HP) | Motor power (HP) 10 | Motor power (HP) 7.5 | Motor power (HP) 12.5 | Motor power (HP) 15 |
Delivery port | Delivery port 3 " | Delivery port 3 " | Delivery port 3 " | Delivery port 3 " |
Body Pump | Body Pump Cast iron | Body Pump -- | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 7 | Number of impellers 6 | Number of impellers 9 | Number of impellers 11 |
Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft -- | Motor shaft AISI 304 stainless steel | Motor shaft -- |
Pump shaft | Pump shaft -- | Pump shaft -- | Pump shaft -- | Pump shaft AISI 304 stainless steel |
Check valve | Check valve no | Check valve -- | Check valve no | Check valve -- |
Degree of protection | Degree of protection IP 68 | Degree of protection -- | Degree of protection IP 68 | Degree of protection -- |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 |
Max flow (l./min.) | Max flow (l./min.) 800 | Max flow (l./min.) 800 | Max flow (l./min.) 800 | Max flow (l./min.) 800 |
Min head (m.) | Min head (m.) 20 | Min head (m.) 20 | Min head (m.) 20 | Min head (m.) 37 |
Max head (m.) | Max head (m.) 70 | Max head (m.) 70 | Max head (m.) 70 | Max head (m.) 129 |
Cable length (m) | Cable length (m) -- | Cable length (m) -- | Cable length (m) -- | Cable length (m) -- |
Employments | Employments fire prevention systems, irrigation, pressurization systems, water supply | Employments fire prevention systems, irrigation, pressurization systems, water supply | Employments fire prevention systems, irrigation, pressurization systems, water supply | Employments water supply, pressurization systems, irrigation, fire prevention systems |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) 35 |
Height (cm) | Height (cm) 167.4 | Height (cm) 167.4 | Height (cm) 167.4 | Height (cm) 237.8 |
Outside diameter (cm) | Outside diameter (cm) 149.5 | Outside diameter (cm) 149.5 | Outside diameter (cm) 149.5 | Outside diameter (cm) 149.5 |
Weight kg) | Weight kg) 64 | Weight kg) 64 | Weight kg) 64 | Weight kg) 90 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |