6SR44/14 - PD - 20 HP three-phase submersible electric pump
Flow rate up to 1000 l/min (60 m³/h). Head up to 174 m. 15 Kw (20 HP) motor.
The 6SR44/14 - PD electric pump by Pedrollo is suitable for use in the civil and agricultural sectors.
The special feature of this pump is the construction of the impellers and diffusers made in such a way as to resist abrasion caused by sand. The pump allows the pumping of water with sand content up to 100 grams per cubic meter.
The 6SR44/14 - PD is suitable for diversified applications such as industrial, municipal and agricultural water needs, for water distribution in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
The pump can be installed in wells with diameters greater than 6 inches and up to 200 meters deep.
It is equipped with a rewindable oil-bath PD motor.
The 6SR44/14 - PD has a flow rate ranging from 200 to 1000 litres per minute with a head from 27.5 to 174 metres.
It must be powered by a three-phase voltage, has a horsepower of 7.5 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The 6SR44/14 - PD has a body made of cast iron, impellers in noryl and the pump shaft in AISI 304 stainless steel. The use of these materials makes the pump resistant, robust and allows it to last over time.
The 4-meter long power cable is supplied.
- Motor connection
- THREE-PHASE
- Motor power (Kw)
- 15
- Motor power (HP)
- 20
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 14
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 800
- Min head (m.)
- 20
- Max head (m.)
- 70
- Cable length (m)
- Employments
- fire prevention systems, irrigation, pressurization systems, water supply
- Liquid temperature max. (° C)
- +35°C
- Height (cm)
- 167.4
- Outside diameter (cm)
- 149.5
- Weight kg)
- 64
- Guarantee
- 2
|
|
|
|
|
|
Bearings
Pump bearing - fixed part | Anti-friction polymer |
Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
1.3 - Delivery body | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
4.2 - Towing joint | Stainless steel EN 1.4021 (AISI 420) |
5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
5.1 - Diffuser | Reinforced technopolymer |
7.0 - Lantern | Cast iron GJL 200 EN 1561 |
7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
6SR44/14 - PD - 20 HP three-phase submersible electric pumpThis product Flow rate up to 1000 l/min (60 m³/h). Head up to 174 m. 15 Kw (20 HP) motor. | 6SR44/12 - PD - 17.5 HP three-phase submersible electric pumpFlow rate up to 1000 l/min (60 m³/h). Head up to 149 m. 13 Kw (17.5 HP) motor. | 6SR44/16 - PD - submersible electric Pump three phase 30 HPFlow rate up to 1000 l/min (60 m3/h). Head up to 186 m. Engine by 22 Kw (30 HP). | 6SR44/20 - PD - 30 HP three-phase submersible electric pumpFlow rate up to 1000 l/min (60 m³/h). Head up to 248 m. 22 Kw (30 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (Kw) | Motor power (Kw) 15 | Motor power (Kw) 13 | Motor power (Kw) -- | Motor power (Kw) 22 |
Motor power (HP) | Motor power (HP) 20 | Motor power (HP) 15 | Motor power (HP) 30 | Motor power (HP) 30 |
Delivery port | Delivery port 3 " | Delivery port 3 " | Delivery port 3 " | Delivery port 3 " |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 14 | Number of impellers 12 | Number of impellers 16 | Number of impellers 22 |
Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft AISI 304 stainless steel | Motor shaft -- | Motor shaft AISI 304 stainless steel |
Pump shaft | Pump shaft -- | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft -- |
Check valve | Check valve no | Check valve no | Check valve -- | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection -- | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 100 |
Max flow (l./min.) | Max flow (l./min.) 800 | Max flow (l./min.) 800 | Max flow (l./min.) 1000 | Max flow (l./min.) 800 |
Min head (m.) | Min head (m.) 20 | Min head (m.) 20 | Min head (m.) 70 | Min head (m.) 20 |
Max head (m.) | Max head (m.) 70 | Max head (m.) 70 | Max head (m.) 186 | Max head (m.) 70 |
Cable length (m) | Cable length (m) -- | Cable length (m) -- | Cable length (m) -- | Cable length (m) -- |
Employments | Employments fire prevention systems, irrigation, pressurization systems, water supply | Employments fire prevention systems, irrigation, pressurization systems, water supply | Employments water supply, pressurization systems, irrigation, fire prevention systems | Employments fire prevention systems, irrigation, pressurization systems, water supply |
Liquid temperature max. (° C) | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C |
Height (cm) | Height (cm) 167.4 | Height (cm) 167.4 | Height (cm) 313.1 | Height (cm) 167.4 |
Outside diameter (cm) | Outside diameter (cm) 149.5 | Outside diameter (cm) 149.5 | Outside diameter (cm) 149.5 | Outside diameter (cm) 149.5 |
Weight kg) | Weight kg) 64 | Weight kg) 64 | Weight kg) 141 | Weight kg) 64 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |