UP 2/2 (10m) - Three-phase submersible electric pump 400 V 0.50 HP

The main feature of the UP 2/2 submersible electric pump is the impossibility of blocking even after long periods of inactivity, thanks to innovative patented technical solutions.

The UP 2/2 subverts the classic design standards of 5” submersible pumps. In fact, compared to pumps of the same type, it is built in the opposite way, that is, with the motor in the lower part and the hydraulic section placed in the upper part (hence the name UP).
Among its revolutionary strengths are its greater compactness and a system of independent floating impellers that allows it to pump clean water with a maximum sand content of up to 150 g/m³, the only one in the world of 5”.

Furthermore, the UP features reduced consumption, a valve that eliminates the “bell effect” to facilitate the expulsion of air bubbles that can form inside the pump and the raised suction grid, not placed on the bottom, to prevent the passage of sand, leaves and other foreign bodies that could clog the hydraulics and therefore reduce performance.
The UP is equipped with a forced flushing system for the mechanical seal lubrication oil and is available in versions with or without float. It can operate in both vertical and horizontal positions.

Due to its high performance and reliability, it is recommended for pumping clean water in the domestic, civil and agricultural sectors, for irrigating vegetable gardens and gardens, for boosting pressure, etc.