UPm 2/4 (10m) - submersible Pump single phase
Flow rate up to 80 l/min (4.8 m3/h). Head up to 63 m. Motor 0.75 Kw (1 HP). 10 metres of cable.
100% secure payments
The prevalent characteristic of the submersible pump UPm 2/4 is the inability to stop responding, even after long periods of inactivity, thanks to innovative and patented technical solutions.
The UPm 2/4 subverts the classic design of the submersible pumps 5”. In fact, compared to pumps of the same type is constructed in an inverse manner, i.e. with the engine in the lower part, the hydraulic cross-section at the top (hence the name UP).
Among his revolutionary strengths are a greater compactness and a system of floating impellers independent that allows you to pump clean water with a maximum sand content can reach 150 g/m3, the only in the world of 5”.
In addition, the UP has reduced consumption, a valve that eliminates the“effect” bell-to facilitate the expulsion of air bubbles which may form inside the pump and the inlet grating raised and not on the bottom to prevent the passage of sand, leaves and other foreign matter that may clog plumbing and reduce the performance.
The UPS is equipped with a system of flushing the forced oil lubrication of the mechanical seals and is available in the versions with float switch or without. Can work both in vertical and horizontal position.
For the high efficiency and reliability is recommended for pumping clean water in domestic, civil, agricultural, irrigation of orchards and gardens, for raising pressure, etc.,
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 6.2
- Capacitor
- 20 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 4
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 80
- Min head (m.)
- 31
- Max head (m.)
- 63
- Cable length (m)
- 10
- Employments
- water supply, irrigation, pressurization systems
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 48.2
- Outside diameter (cm)
- 15
- Weight kg)
- 15.8
- Guarantee
- Two years
Compare with Similar Products
 UPm 2/4 (10m) - submersible Pump single phaseThis product Flow rate up to 80 l/min (4.8 m3/h). Head up to 63 m. Motor 0.75 Kw (1 HP). 10 metres of cable. |  UPm 2/3 (10m) - submersible Pump single phase (4/5) out of 1 total ratings Flow rate up to 80 l/min (4.8 m3/h). Head up to 48 m. Motor 0.55 Kw (0.75 HP). 10 metres of cable. |  UPm 2/5 (10m) - submersible Pump single phaseFlow rate up to 80 l/min (4.8 m3/h). Prevalence of up to 81 m. Motor 1.1 Kw (1.5 HP). 10 metres of cable. |  UPm 2/6 (10m) - submersible Pump single phaseFlow rate up to 80 l/min (4.8 m3/h). Head up to 95 m. Motor 1.5 Kw (2 HP). 10 metres of cable. | |
|---|---|---|---|---|
Brand | Brand Pedrollo | Brand Pedrollo | Brand Pedrollo | Brand Pedrollo |
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.75 | Motor power (HP) 1.5 | Motor power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 6.2 | Absorption at 230V (A) 5.4 | Absorption at 230V (A) 7.6 | Absorption at 230V (A) 8.8 |
Capacitor | Capacitor 20 µF450 VL | Capacitor 16 µF450 VL | Capacitor 25 µF450 VL | Capacitor 35 µF450 VL |
Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 4 | Number of impellers 3 | Number of impellers 5 | Number of impellers 6 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 |
Max flow (l./min.) | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 80 |
Min head (m.) | Min head (m.) 31 | Min head (m.) 23 | Min head (m.) 41 | Min head (m.) 48 |
Max head (m.) | Max head (m.) 63 | Max head (m.) 48 | Max head (m.) 81 | Max head (m.) 95 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
Employments | Employments water supply, irrigation, pressurization systems | Employments water supply, irrigation, pressurization systems | Employments water supply, irrigation, pressurization systems | Employments water supply, irrigation, pressurization systems |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 48.2 | Height (cm) 42.5 | Height (cm) 50.9 | Height (cm) 55.6 |
Outside diameter (cm) | Outside diameter (cm) 15 | Outside diameter (cm) 15 | Outside diameter (cm) 15 | Outside diameter (cm) 15 |
Weight kg) | Weight kg) 15.8 | Weight kg) 14.2 | Weight kg) 17.2 | Weight kg) 19.5 |
Guarantee | Guarantee Two years | Guarantee Two years | Guarantee Two years | Guarantee Two years |
UPm models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
