6SR36/18 - PSR - 25 HP three-phase submersible electric pump
Flow rate up to 800 l/min (60 m³/h). Head up to 224 m. 18.5 Kw (25 HP) motor.
The 6SR36/18 - PSR electric pump by Pedrollo is equipped with impellers and diffusers made of special materials capable of resisting abrasion caused by sand.
Recommended for pumping clean water with sand content not exceeding 100 grams per cubic meter.
The 6SR36/18 - PSR is recommended in the civil and agricultural sectors. In particular, its characteristics make it suitable for water distribution in combination with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
Equipped with a PD motor, this allows it to be installed up to 150 meters below the water level.
It can be installed in all wells larger than 6 inches in diameter.
The 6SR36/18 - PSR has a flow rate ranging from 200 to 1000 litres per minute with a head of 75 to 224 metres.
It must be powered by a three-phase voltage, has a horsepower of 25 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The pump construction is solid. Pedrollo has used stainless steel and cast iron to create a product that is resistant and robust.
The 6SR36/18 - PSR comes with a 4 meter long power cable.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 18.5
- Power (HP)
- 25
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 18
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 800
- Min head (m.)
- 20
- Max head (m.)
- 70
- Cable length (m)
- Employments
- fire prevention systems, irrigation, pressurization systems, water supply
- Liquid temperature max. (° C)
- +35°C
- Height (cm)
- 167.4
- Outside diameter (cm)
- 149.5
- Weight kg)
- 64
- Guarantee
- 2
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Compare with Similar Products
 6SR36/18 - PSR - 25 HP three-phase submersible electric pumpThis product Flow rate up to 800 l/min (60 m³/h). Head up to 224 m. 18.5 Kw (25 HP) motor. |  PKSm 65 - Self-priming electric pump with 0.75 HP single-phase peripheral impellerFlow rate up to 50 l/min (3 m³/h). Head up to 55 m. 0.55 Kw (0.75 HP) motor. |  PKS 65 - Self-priming electric pump with 0.75 HP three-phase peripheral impellerFlow rate up to 50 l/min (3 m³/h). Head up to 55 m. 0.55 Kw (0.75 HP) motor. |  4SRm 2/12 F-PD - 1 HP submersible single-phase electric pumpFlow rate up to 65 l / min (3.9 m³ / h). Head up to 94 meters. 0.75 Kw (1 HP) engine. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection SINGLE PHASE | Motor connection THREE-PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 18.5 | Power (Kw) 0.55 | Power (Kw) -- | Power (Kw) -- |
| Power (HP) | Power (HP) 25 | Power (HP) 0.75 | Power (HP) 0.75 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) 3.7 | Absorption at 230V (A) 3 | Absorption at 230V (A) 5.9 |
| Capacitor | Capacitor -- | Capacitor 14 µF450 VL | Capacitor -- | Capacitor -- |
| Absorption at 400V (A) | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) 1.7 | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth -- | Suction mouth 1 " | Suction mouth 1 " | Suction mouth -- |
| Delivery port | Delivery port 3 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Noryl | Impeller Brass | Impeller Brass | Impeller Delrin |
| Number of impellers | Number of impellers 18 | Number of impellers 1 | Number of impellers 1 | Number of impellers 12 |
| Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft -- |
| Pump shaft | Pump shaft -- | Pump shaft -- | Pump shaft -- | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve Yes |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 800 | Max flow (l./min.) 50 | Max flow (l./min.) 50 | Max flow (l./min.) 65 |
| Min head (m.) | Min head (m.) 20 | Min head (m.) 8 | Min head (m.) 8 | Min head (m.) 25.7 |
| Max head (m.) | Max head (m.) 70 | Max head (m.) 55 | Max head (m.) 55 | Max head (m.) 94 |
| Cable length (m) | Cable length (m) -- | Cable length (m) -- | Cable length (m) -- | Cable length (m) 2 |
| Employments | Employments fire prevention systems, irrigation, pressurization systems, water supply | Employments water supply | Employments water supply | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) 35 |
| Motor voltage | Motor voltage -- | Motor voltage 230 V | Motor voltage 230 V, 400 V | Motor voltage -- |
| Height (cm) | Height (cm) 167.4 | Height (cm) 19 | Height (cm) 19 | Height (cm) 75.8 |
| Width (cm) | Width (cm) -- | Width (cm) 22.7 | Width (cm) 22.7 | Width (cm) -- |
| Depth (cm) | Depth (cm) -- | Depth (cm) 14.8 | Depth (cm) 14.8 | Depth (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) 149.5 | Outside diameter (cm) -- | Outside diameter (cm) -- | Outside diameter (cm) 9.8 |
| Weight kg) | Weight kg) 64 | Weight kg) 7.6 | Weight kg) 6.9 | Weight kg) 13.1 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |