chevron_left chevron_right
HF 30B - 7.5 HP three-phase centrifugal electric pump
Flow rate up to 2000 l/min (144 m³/h). Head up to 18 m. 5.5 Kw (7.5 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the HF high flow rate line are recommended for civil and agricultural environments.
The PEDROLLO HF 30B has a flow rate that varies from 600 to 2000 litres per minute with a head of 18 to 13 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Absorption at 230V (A)
- 21.3
- Absorption at 400V (A)
- 12.3
- Flow rate min. (l./min.)
- 200
- Max flow (l./min.)
- 2400
- Min head (m.)
- 10
- Max head (m.)
- 18
- Liquid temperature max. (° C)
- +90°C
- Height (cm)
- 37
- Width (cm)
- 49.7
- Depth (cm)
- 29.2
- Weight kg)
- 60.9
HF models and performances - High flow rates
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 30B-30A
Bearings
| Pump side motor bearing | 6307 ZZ - C3 |
| Opposite side motor bearing | 6206 ZZ - C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 HF 30B - 7.5 HP three-phase centrifugal electric pumpThis product Flow rate up to 2000 l/min (144 m³/h). Head up to 18 m. 5.5 Kw (7.5 HP) motor. |  HF 8B - centrifugal electric Pump three-phaseFlow rate up to 1200 l/min (72 m3/h). Head up to 21 m. Engine 3 Kw (4 HP). |  HF 20B - 4 HP three-phase centrifugal electric pumpFlow rate up to 1700 l/min (102 m³/h). Head up to 15.5 m. 3 Kw (4 HP) motor. |  HF 30A - 10 HP Three-Phase Centrifugal Electric PumpFlow rate up to 2200 l/min (144 m³/h). Head up to 23 m. 7.5 Kw (10 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection -- | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) -- | Motor power (HP) 4 | Motor power (HP) 4 | Motor power (HP) 10 |
| Absorption at 230V (A) | Absorption at 230V (A) 21.3 | Absorption at 230V (A) 12.1 | Absorption at 230V (A) 12.8 | Absorption at 230V (A) 28.6 |
| Absorption at 400V (A) | Absorption at 400V (A) 12.3 | Absorption at 400V (A) 7.0 | Absorption at 400V (A) 7.5 | Absorption at 400V (A) 16.5 |
| Suction mouth | Suction mouth -- | Suction mouth 4 " | Suction mouth 4 " | Suction mouth 4 " |
| Delivery port | Delivery port -- | Delivery port 4 " | Delivery port 4 " | Delivery port 4 " |
| Body Pump | Body Pump -- | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller -- | Impeller Brass | Impeller Cast iron | Impeller Cast iron |
| Number of impellers | Number of impellers -- | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft -- | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve -- | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection -- | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 200 |
| Max flow (l./min.) | Max flow (l./min.) 2400 | Max flow (l./min.) 1200 | Max flow (l./min.) 1700 | Max flow (l./min.) 2400 |
| Min head (m.) | Min head (m.) 10 | Min head (m.) 9 | Min head (m.) 7 | Min head (m.) 15 |
| Max head (m.) | Max head (m.) 18 | Max head (m.) 21.5 | Max head (m.) 19 | Max head (m.) 23 |
| Employments | Employments -- | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, irrigation, cooling systems, transfer of tanks |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) +90°C |
| Motor voltage | Motor voltage -- | Motor voltage 400 V | Motor voltage 400 V | Motor voltage 400 V |
| Height (cm) | Height (cm) 37 | Height (cm) 31.2 | Height (cm) 31.2 | Height (cm) 37 |
| Width (cm) | Width (cm) 49.7 | Width (cm) 44.5 | Width (cm) 45.3 | Width (cm) 54.7 |
| Depth (cm) | Depth (cm) 29.2 | Depth (cm) 24.5 | Depth (cm) 25.5 | Depth (cm) 29.2 |
| Weight kg) | Weight kg) 60.9 | Weight kg) 35 | Weight kg) 36 | Weight kg) 65.2 |
| Guarantee | Guarantee -- | Guarantee 2 | Guarantee 2 | Guarantee 2 |