3CP 80-I - 0.60 HP three-phase multi-impeller electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 38 m. 0.45 Kw (0.60 HP) motor.



They are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to their reliability and silence, they are widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of vegetable gardens or gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (HP)
- 0.60
- Absorption at 230V (A)
- 2.5
- Absorption at 400V (A)
- 1.5
- Suction mouth
- 1 "
- Delivery mouth
- 1 "
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 5
- Max. head (m.)
- 40
- Jobs
- water supply, pressurization systems, irrigation
- Max. liquid temperature (°C)
- 40
- Height (cm)
- 17.2
- Width (cm)
- 15.8
- Depth (cm)
- 30.7
- Weight (Kg)
- 9.3
- Warranty (years)
- 2
|
|
|
|
|

Bearings
Pump side motor bearing | 6202 ZZ - C3 |
Opposite side motor bearing | 6201 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-13 |
LP diameter | 13 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
5.2 - Shim Ring | POM acetal resin |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
![]() 3CP 80-I - 0.60 HP three-phase multi-impeller electric pumpThis product Flow rate up to 80 l/min (4.8 m³/h). Head up to 38 m. 0.45 Kw (0.60 HP) motor. | ![]() 421 - 9 kg fertilizer spreaderManual fertilizer spreader. | |
---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection -- |
Power (HP) | Power (HP) 0.60 | Power (HP) -- |
Absorption at 230V (A) | Absorption at 230V (A) 2.5 | Absorption at 230V (A) -- |
Absorption at 400V (A) | Absorption at 400V (A) 1.5 | Absorption at 400V (A) -- |
Suction mouth | Suction mouth 1 " | Suction mouth -- |
Delivery mouth | Delivery mouth 1 " | Delivery mouth -- |
Pump body | Pump body Cast iron | Pump body -- |
Impeller | Impeller AISI 304 stainless steel | Impeller -- |
Number of impellers | Number of impellers 3 | Number of impellers -- |
Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft -- |
Check valve | Check valve No | Check valve -- |
Degree of protection | Degree of protection IP 44 | Degree of protection -- |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 5 | Min. flow rate (l./min.) -- |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 80 | Max. flow rate (l./min.) -- |
Min. head (m.) | Min. head (m.) 5 | Min. head (m.) -- |
Max. head (m.) | Max. head (m.) 40 | Max. head (m.) -- |
Tank capacity (litres) | Tank capacity (litres) -- | Tank capacity (litres) 9 |
Jobs | Jobs water supply, pressurization systems, irrigation | Jobs -- |
Max. liquid temperature (°C) | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) -- |
Height (cm) | Height (cm) 17.2 | Height (cm) -- |
Width (cm) | Width (cm) 15.8 | Width (cm) -- |
Depth (cm) | Depth (cm) 30.7 | Depth (cm) -- |
Weight (Kg) | Weight (Kg) 9.3 | Weight (Kg) 2.5 |
Warranty (years) | Warranty (years) 2 | Warranty (years) -- |