5CR 80 - 1 HP three-phase multi-impeller centrifugal electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 67 m. Motor 0.75 Kw (1 HP).
It is recommended for pumping clean water without abrasive particles and liquids that are not chemically aggressive for the materials from which the pump is made.
Due to their reliability and ease of use, they are widely used in the domestic and civil sector, in particular for the distribution of water in conjunction with small and medium-sized pressure tanks, for decanting and for irrigation of vegetable gardens and gardens.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 4.3
- Absorption at 400V (A)
- 2.5
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 5
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 80
- Min head (m.)
- 12
- Max head (m.)
- 67
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 20.2
- Width (cm)
- 18.2
- Depth (cm)
- 41.1
- Weight kg)
- 10.6
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side motor bearing | 6203 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-13 |
LP diameter | 13 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
5.2 - Shim Ring | POM acetal resin |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
5CR 80 - 1 HP three-phase multi-impeller centrifugal electric pumpThis product Flow rate up to 80 l/min (4.8 m³/h). Head up to 67 m. Motor 0.75 Kw (1 HP). | Dichondra Repens - 1 kg lawn seedFor public and private areas without foot traffic. | Blend Bermudagrass - 5kg Lawn SeedFor public and private areas with foot traffic. | Bahiagrass - 5 kg lawn seedFor sunny and partial shade areas. | |
---|---|---|---|---|
Bermuda Grass (%) | Bermuda Grass (%) -- | Bermuda Grass (%) -- | Bermuda Grass (%) 100 | Bermuda Grass (%) -- |
Dichondra Repens (%) | Dichondra Repens (%) -- | Dichondra Repens (%) 100 | Dichondra Repens (%) -- | Dichondra Repens (%) -- |
Paspalum (%) | Paspalum (%) -- | Paspalum (%) -- | Paspalum (%) -- | Paspalum (%) 100 |
Months of sowing | Months of sowing -- | Months of sowing Feb, Mar, Apr, Mag, Down, Ago, Set, Oct, Nov. | Months of sowing Apr, Mag, Down, Jul, Ago | Months of sowing Apr, Mag, Down, Jul, Ago |
Sectors of use | Sectors of use -- | Sectors of use Gardens and parks | Sectors of use Gardens and parks, Residential, Sports surfaces | Sectors of use Turf areas, Gardens and parks, Sea areas |
Dosage | Dosage -- | Dosage 50 g/m2 | Dosage 10-20 g / m2 | Dosage -- |
Motor connection | Motor connection THREE-PHASE | Motor connection -- | Motor connection -- | Motor connection -- |
Power (Kw) | Power (Kw) 0.75 | Power (Kw) -- | Power (Kw) -- | Power (Kw) -- |
Power (HP) | Power (HP) 1 | Power (HP) -- | Power (HP) -- | Power (HP) -- |
Absorption at 230V (A) | Absorption at 230V (A) 4.3 | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
Absorption at 400V (A) | Absorption at 400V (A) 2.5 | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) -- |
Suction mouth | Suction mouth 1 " | Suction mouth -- | Suction mouth -- | Suction mouth -- |
Delivery port | Delivery port 1 " | Delivery port -- | Delivery port -- | Delivery port -- |
Body Pump | Body Pump AISI 304 stainless steel | Body Pump -- | Body Pump -- | Body Pump -- |
Impeller | Impeller Noryl | Impeller -- | Impeller -- | Impeller -- |
Number of impellers | Number of impellers 5 | Number of impellers -- | Number of impellers -- | Number of impellers -- |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- | Motor shaft -- | Motor shaft -- |
Check valve | Check valve no | Check valve -- | Check valve -- | Check valve -- |
Degree of protection | Degree of protection IP 44 | Degree of protection -- | Degree of protection -- | Degree of protection -- |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- |
Max flow (l./min.) | Max flow (l./min.) 80 | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) -- |
Min head (m.) | Min head (m.) 12 | Min head (m.) -- | Min head (m.) -- | Min head (m.) -- |
Max head (m.) | Max head (m.) 67 | Max head (m.) -- | Max head (m.) -- | Max head (m.) -- |
Employments | Employments water supply, pressurization systems, irrigation | Employments -- | Employments -- | Employments -- |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
Species | Species -- | Species macrotherm | Species macrotherm | Species macrotherm |
Resistance | Resistance -- | Resistance Great | Resistance Great | Resistance good |
Height (cm) | Height (cm) 20.2 | Height (cm) -- | Height (cm) -- | Height (cm) -- |
Width (cm) | Width (cm) 18.2 | Width (cm) -- | Width (cm) -- | Width (cm) -- |
Depth (cm) | Depth (cm) 41.1 | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
Weight kg) | Weight kg) 10.6 | Weight kg) 1 | Weight kg) 5 | Weight kg) 5 |
Packaging | Packaging -- | Packaging -- | Packaging box | Packaging lot |
Guarantee | Guarantee 2 | Guarantee -- | Guarantee -- | Guarantee -- |