2CP 32/210B - 7.5 HP three-phase twin-impeller centrifugal pump
Flow rate up to 250 l/min (15 m³/h). Head up to 94 m. 5.5 Kw (7.5 HP) motor.




The PEDROLLO pumps of the 2CP line are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PEDROLLO 2CPm 32/210B has a flow rate that varies from 40 to 250 litres per minute with a head from 56 to 94 metres.
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with pressure tanks, for increasing the pressure in the network, for fire-fighting groups.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Absorption at 230V (A)
- 12.5
- Absorption at 400V (A)
- 21.7
- Suction mouth
- 2"
- Delivery mouth
- 1 "1/4
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 2
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 40
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 56
- Max. head (m.)
- 94
- Jobs
- water supply, pressurization systems, fire prevention systems
- Max. liquid temperature (°C)
- 90
- Height (cm)
- 33.4
- Width (cm)
- 29.2
- Depth (cm)
- 54.2
- Weight (Kg)
- 54
- Warranty (years)
- 2
|
|
|
|
|

Bearings
Pump side motor bearing | 6306 ZZ-C3 |
Opposite side engine bearing | 6206 ZZ-C3 |
Tree holding
Type of seal | Single Mechanical Seal |
Pump side model | FN-24 |
LP diameter | 24 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.1 - Suction Body | Cast iron GJL 200 EN 1561 |
1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46126 |
Compare with Similar Products
![]() 2CP 32/210B - 7.5 HP three-phase twin-impeller centrifugal pumpThis product Flow rate up to 250 l/min (15 m³/h). Head up to 94 m. 5.5 Kw (7.5 HP) motor. | |
---|---|
Motor connection | Motor connection THREE-PHASE |
Power (Kw) | Power (Kw) 5.5 |
Power (HP) | Power (HP) 7.5 |
Absorption at 230V (A) | Absorption at 230V (A) 12.5 |
Absorption at 400V (A) | Absorption at 400V (A) 21.7 |
Suction mouth | Suction mouth 2" |
Delivery mouth | Delivery mouth 1 "1/4 |
Pump body | Pump body Cast iron |
Impeller | Impeller Brass |
Number of impellers | Number of impellers 2 |
Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve No |
Degree of protection | Degree of protection IP 44 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 40 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 250 |
Min. head (m.) | Min. head (m.) 56 |
Max. head (m.) | Max. head (m.) 94 |
Jobs | Jobs water supply, pressurization systems, fire prevention systems |
Max. liquid temperature (°C) | Max. liquid temperature (°C) 90 |
Height (cm) | Height (cm) 33.4 |
Width (cm) | Width (cm) 29.2 |
Depth (cm) | Depth (cm) 54.2 |
Weight (Kg) | Weight (Kg) 54 |
Warranty (years) | Warranty (years) 2 |