chevron_left chevron_right
-42%
2CPm 25/16B - 2 HP single-phase twin-impeller centrifugal electric pump
Flow rate up to 140 l/min (8.4 m³/h). Head up to 58 m. 1.5 Kw (2 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the 2CP line are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PEDROLLO 2CPm 25/16B has a flow rate that varies from 20 to 140 litres per minute with a head from 58 to 30 metres.
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with pressure tanks, for increasing the pressure in the network, for fire-fighting groups.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 10.0
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 2
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 140
- Min head (m.)
- 30
- Max head (m.)
- 58
- Employments
- water supply, pressurization systems, fire prevention systems
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 26.1
- Width (cm)
- 22.5
- Depth (cm)
- 40.4
- Weight kg)
- 24.4
- Guarantee
- 2
Models and performances 2CPm 25/16
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CP 25
Bearings
| Pump side motor bearing | 6204 ZZ-C3 |
| Opposite side motor bearing | 6204 ZZ-C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Aspiring Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46102 |
Compare with Similar Products
 2CPm 25/16B - 2 HP single-phase twin-impeller centrifugal electric pumpThis product Flow rate up to 140 l/min (8.4 m³/h). Head up to 58 m. 1.5 Kw (2 HP) motor. |  Active Driver Plus T / T 5.5 - 13.3 A three-phase inverterInverter for three-phase pumps up to 7.5 HP |  Dora - 9.5 kw ivory pellet stoveEnergy class A+. Remote control included. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection -- | Motor connection -- |
| Power (Kw) | Power (Kw) 1.5 | Power (Kw) -- | Power (Kw) -- |
| Power (HP) | Power (HP) 2 | Power (HP) -- | Power (HP) -- |
| Absorption at 230V (A) | Absorption at 230V (A) 10.0 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Capacitor | Capacitor 45 µF450 VL | Capacitor -- | Capacitor -- |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth -- |
| Delivery port | Delivery port 1 " | Delivery port 1 "1/2 | Delivery port -- |
| Body Pump | Body Pump Cast iron | Body Pump -- | Body Pump -- |
| Impeller | Impeller Brass | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 2 | Number of impellers -- | Number of impellers -- |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- | Motor shaft -- |
| Check valve | Check valve no | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 55 | Degree of protection -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 140 | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 30 | Min head (m.) -- | Min head (m.) -- |
| Max head (m.) | Max head (m.) 58 | Max head (m.) -- | Max head (m.) -- |
| Fuel | Fuel -- | Fuel -- | Fuel Pellets |
| Rear smoke outlet | Rear smoke outlet -- | Rear smoke outlet -- | Rear smoke outlet Ø 80 mm |
| Power burned min. (Kw) | Power burned min. (Kw) -- | Power burned min. (Kw) -- | Power burned min. (Kw) 2.8 |
| Burned power max. (Kw) | Burned power max. (Kw) -- | Burned power max. (Kw) -- | Burned power max. (Kw) 9.5 |
| Nominal performance min. (%) | Nominal performance min. (%) -- | Nominal performance min. (%) -- | Nominal performance min. (%) 90 |
| Nominal efficiency max. (%) | Nominal efficiency max. (%) -- | Nominal efficiency max. (%) -- | Nominal efficiency max. (%) 88 |
| Heatable volume min. (mc) | Heatable volume min. (mc) -- | Heatable volume min. (mc) -- | Heatable volume min. (mc) 140 |
| Heatable volume max. (mc) | Heatable volume max. (mc) -- | Heatable volume max. (mc) -- | Heatable volume max. (mc) 200 |
| Hourly consumption min. (Kg) | Hourly consumption min. (Kg) -- | Hourly consumption min. (Kg) -- | Hourly consumption min. (Kg) 0.6 |
| Hourly consumption max. (Kg) | Hourly consumption max. (Kg) -- | Hourly consumption max. (Kg) -- | Hourly consumption max. (Kg) 2.0 |
| Pellet tank capacity (Kg) | Pellet tank capacity (Kg) -- | Pellet tank capacity (Kg) -- | Pellet tank capacity (Kg) 13.5 |
| Employments | Employments water supply, pressurization systems, fire prevention systems | Employments -- | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
| Work surface (sqm) | Work surface (sqm) -- | Work surface (sqm) -- | Work surface (sqm) -- |
| Line power supply | Line power supply -- | Line power supply three-phase | Line power supply -- |
| Supply voltage (Volt) | Supply voltage (Volt) -- | Supply voltage (Volt) 400 | Supply voltage (Volt) -- |
| Line current | Line current -- | Line current 16 | Line current -- |
| Line phases | Line phases -- | Line phases 3 x 400 V | Line phases -- |
| Motor power supply | Motor power supply -- | Motor power supply three-phase | Motor power supply -- |
| Motor voltage | Motor voltage -- | Motor voltage 400 V | Motor voltage -- |
| Motor phase current | Motor phase current -- | Motor phase current 13.3 | Motor phase current -- |
| Engine phases | Engine phases -- | Engine phases 3 x 400 V | Engine phases -- |
| Amperometric protection | Amperometric protection -- | Amperometric protection Yes | Amperometric protection -- |
| Short circuit protection | Short circuit protection -- | Short circuit protection Yes | Short circuit protection -- |
| Dry running protection | Dry running protection -- | Dry running protection Yes | Dry running protection -- |
| Height (cm) | Height (cm) 26.1 | Height (cm) 28.2 | Height (cm) 90.1 |
| Width (cm) | Width (cm) 22.5 | Width (cm) 23.7 | Width (cm) 46.5 |
| Depth (cm) | Depth (cm) 40.4 | Depth (cm) 18.4 | Depth (cm) 50.6 |
| Weight kg) | Weight kg) 24.4 | Weight kg) -- | Weight kg) 57.7 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
| Color | Color -- | Color -- | Color ivory |
| Heating | Heating -- | Heating -- | Heating ventilated |
Reviews (1) - Review moderation
Ottimo prodotto perfettamente funzionante
Arrivato integro ma imballaggio un pò precario
By Paolo M. the 09/12/2018