2CPm 25/130N - 1 HP single-phase twin-impeller centrifugal electric pump
Flow rate up to 100 l/min (6 m³/h). Head up to 42 m. 0.75 Kw (1 HP) motor.
The PEDROLLO pumps of the 2CP line are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PEDROLLO 2CPm 25/130N has a flow rate that varies from 20 to 100 litres per minute with a head from 39 to 15 metres.
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with pressure tanks, for increasing the pressure in the network, for fire-fighting groups.
Installation must be carried out indoors or in any case protected from the elements.
- Absorption at 230V (A)
- 6.3
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 100
- Min head (m.)
- 15
- Max head (m.)
- 42
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 20.1
- Width (cm)
- 18
- Depth (cm)
- 33
- Weight kg)
- 14.5
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 2CPm 25/130N - 1 HP single-phase twin-impeller centrifugal electric pumpThis product Flow rate up to 100 l/min (6 m³/h). Head up to 42 m. 0.75 Kw (1 HP) motor. |  2CPm 25/14B - 1.5 HP single-phase twin-impeller centrifugal electric pumpFlow rate up to 100 l/min (6 m³/h). Head up to 54 m. 1.1 Kw (1.5 HP) motor. |  2CPm 25/14A - 2 HP single-phase twin-impeller centrifugal pumpFlow rate up to 100 l/min (6 m³/h). Head up to 67 m. 1.5 Kw (2 HP) motor. | |
|---|---|---|---|
| Motor connection | Motor connection -- | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) -- | Power (HP) 1.5 | Power (HP) 2 |
| Absorption at 230V (A) | Absorption at 230V (A) 6.3 | Absorption at 230V (A) 7.7 | Absorption at 230V (A) 10.5 |
| Capacitor | Capacitor -- | Capacitor 25 µF450 VL | Capacitor 45 µF450 VL |
| Suction mouth | Suction mouth -- | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
| Delivery port | Delivery port -- | Delivery port 1 " | Delivery port 1 " |
| Body Pump | Body Pump -- | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller -- | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers -- | Number of impellers 2 | Number of impellers 2 |
| Motor shaft | Motor shaft -- | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve -- | Check valve no | Check valve no |
| Degree of protection | Degree of protection -- | Degree of protection IP 44 | Degree of protection IP 44 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 100 | Max flow (l./min.) 100 | Max flow (l./min.) 100 |
| Min head (m.) | Min head (m.) 15 | Min head (m.) 22 | Min head (m.) 32 |
| Max head (m.) | Max head (m.) 42 | Max head (m.) 54 | Max head (m.) 67 |
| Employments | Employments -- | Employments water supply, pressurization systems, fire prevention systems | Employments water supply, pressurization systems, fire prevention systems |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
| Height (cm) | Height (cm) 20.1 | Height (cm) 22.3 | Height (cm) 26.1 |
| Width (cm) | Width (cm) 18 | Width (cm) 20 | Width (cm) 22.5 |
| Depth (cm) | Depth (cm) 33 | Depth (cm) 40.4 | Depth (cm) 40.4 |
| Weight kg) | Weight kg) 14.5 | Weight kg) 19.3 | Weight kg) 23.5 |
| Guarantee | Guarantee -- | Guarantee 2 | Guarantee 2 |
Reviews (3) - Review moderation
Il cliente non ha lasciato alcun commento.
ottimo prodotto
Ottimo sito e ottime persone..mi hanno consigliato nella scelta ottimale della elettropompa.Disponibili e competenti..grazie
