chevron_left chevron_right
-45%
FCRm 200/4 - 2 HP single-phase multi-impeller electric pump
With stainless steel impellers. Flow rate up to 200 l/min (12 m³/h). Head up to 58 m. Motor 1.5 Kw (2 HP).
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The Pedrollo FCRm 200/4 multi-impeller pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to its reliability and silence, it is widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of vegetable gardens or gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 2
- Absorption at 230V (A)
- 10.5
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery mouth
- 1 "
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 4
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 200
- Min. head (m.)
- 17
- Max. head (m.)
- 58
- Jobs
- irrigation
- Max. liquid temperature (°C)
- 90
- Height (cm)
- 22.8
- Width (cm)
- 47.1
- Depth (cm)
- 18.5
- Weight (Kg)
- 20.4
- Warranty (years)
- 2
Models and performance FCRm 200-240
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the FCR-90-FCR-130-FCR 200
Bearings
| Pump side motor bearing | 6304 2RS-C3 |
| Opposite side motor bearing | 6204 ZZ-C3E |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 FCRm 200/4 - 2 HP single-phase multi-impeller electric pumpThis product With stainless steel impellers. Flow rate up to 200 l/min (12 m³/h). Head up to 58 m. Motor 1.5 Kw (2 HP). | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 2 |
| Absorption at 230V (A) | Absorption at 230V (A) 10.5 |
| Capacitor | Capacitor 45 µF450 VL |
| Suction mouth | Suction mouth 1 "1/4 |
| Delivery mouth | Delivery mouth 1 " |
| Pump body | Pump body AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 4 |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No |
| Degree of protection | Degree of protection IP 44 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 200 |
| Min. head (m.) | Min. head (m.) 17 |
| Max. head (m.) | Max. head (m.) 58 |
| Jobs | Jobs irrigation |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) 90 |
| Height (cm) | Height (cm) 22.8 |
| Width (cm) | Width (cm) 47.1 |
| Depth (cm) | Depth (cm) 18.5 |
| Weight (Kg) | Weight (Kg) 20.4 |
| Warranty (years) | Warranty (years) 2 |
