HT 30/3-PRO - 7.5 HP three-phase vertical multistage electric pump
Flow rate up to 800 l/min (5.4 m³/h). Head up to 60 m. Motor 5.5 Kw (7.5 HP).




The Pedrollo HT 30/3-PRO vertical multi-impeller centrifugal electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
It has a flow rate that varies from 100 to 800 litres per minute with a head of 12 to 60 metres.
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with autoclave tanks, increasing the pressure in the network.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Suction mouth
- 2 "1/2
- Delivery mouth
- 2 "1/2
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Check valve
- No
- Min. flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 800
- Min. head (m.)
- 12
- Max. head (m.)
- 60
- Jobs
- fire prevention systems, washing systems, irrigation, pressurization systems, water supply
- Warranty (years)
- 2
|
|
|
|
|

Bearings
Pump side motor bearing | 6307 2RS-C3 |
Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | FN-KU-24 |
LP diameter | 24 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
2.0 - Lid | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
![]() HT 30/3-PRO - 7.5 HP three-phase vertical multistage electric pumpThis product Flow rate up to 800 l/min (5.4 m³/h). Head up to 60 m. Motor 5.5 Kw (7.5 HP). | |
---|---|
Motor connection | Motor connection THREE-PHASE |
Power (Kw) | Power (Kw) 5.5 |
Power (HP) | Power (HP) 7.5 |
Suction mouth | Suction mouth 2 "1/2 |
Delivery mouth | Delivery mouth 2 "1/2 |
Pump body | Pump body Cast iron |
Impeller | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 3 |
Check valve | Check valve No |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 100 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 800 |
Min. head (m.) | Min. head (m.) 12 |
Max. head (m.) | Max. head (m.) 60 |
Jobs | Jobs fire prevention systems, washing systems, irrigation, pressurization systems, water supply |
Warranty (years) | Warranty (years) 2 |