HT 8/6-PRO - 3 HP three-phase vertical multistage electric pump
Flow rate up to 200 l/min (7.8 m³/h). Head up to 94 m. Motor 2.2 Kw (3 HP).




The Pedrollo HT 8/6-PRO vertical multi-impeller centrifugal electric pump is recommended for pumping clean water and liquids that are not chemically aggressive for the materials from which the pump is made. It differs from the basic series in having a cast iron pump body.
It has a flow rate that varies from 20 to 200 litres per minute with a head from 34.5 to 94 metres.
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with autoclave tanks, increasing the pressure in the network.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Suction mouth
- 1 "1/2
- Delivery mouth
- 1 "1/2
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Check valve
- No
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 200
- Min. head (m.)
- 34.5
- Max. head (m.)
- 94
- Jobs
- fire prevention systems, washing systems, irrigation, pressurization systems, water supply
- Warranty (years)
- 2
|
|
|
|
|

Bearings
Pump side motor bearing | 6307 2RS-C3 |
Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | FN-18 |
LP diameter | 18 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
2.0 - Lid | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
![]() HT 8/6-PRO - 3 HP three-phase vertical multistage electric pumpThis product Flow rate up to 200 l/min (7.8 m³/h). Head up to 94 m. Motor 2.2 Kw (3 HP). | ![]() DCm 10 - Single-phase cast iron electric pump for clear water, 1 HPFlow rate up to 300 l/min (18 m³/h). Head up to 16 m. 0.75 Kw (1 HP) motor. | |
---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection SINGLE PHASE |
Power (Kw) | Power (Kw) 2.2 | Power (Kw) 0.75 |
Power (HP) | Power (HP) 3 | Power (HP) 1 |
Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) 4.7 |
Capacitor | Capacitor -- | Capacitor 20 µF450 VL |
Suction mouth | Suction mouth 1 "1/2 | Suction mouth -- |
Delivery mouth | Delivery mouth 1 "1/2 | Delivery mouth 1 "1/2 |
Pump body | Pump body AISI 304 stainless steel | Pump body Cast iron |
Impeller | Impeller AISI 304 stainless steel | Impeller Technopolymer |
Number of impellers | Number of impellers 3 | Number of impellers 1 |
Crankshaft | Crankshaft -- | Crankshaft AISI 431 stainless steel |
Check valve | Check valve No | Check valve No |
Degree of protection | Degree of protection -- | Degree of protection IP 68 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) 25 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 200 | Max. flow rate (l./min.) 300 |
Min. head (m.) | Min. head (m.) 34.5 | Min. head (m.) 3 |
Max. head (m.) | Max. head (m.) 94 | Max. head (m.) 16 |
Cable length (m) | Cable length (m) -- | Cable length (m) 10 |
Jobs | Jobs fire prevention systems, washing systems, irrigation, pressurization systems, water supply | Jobs drainage, drying up, slightly dirty waters |
Max. liquid temperature (°C) | Max. liquid temperature (°C) -- | Max. liquid temperature (°C) 40 |
Height (cm) | Height (cm) -- | Height (cm) 32.2 |
Weight (Kg) | Weight (Kg) -- | Weight (Kg) 16.9 |
Warranty (years) | Warranty (years) 2 | Warranty (years) 2 |