chevron_left chevron_right
-45%
HTm 8/6-PRO - 3 HP single-phase vertical multistage electric pump
Flow rate up to 200 l/min (12 m³/h). Head up to 94 m. Motor 2.2 Kw (3 HP).
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The Pedrollo HTm 8/6-PRO vertical multi-impeller centrifugal electric pump is recommended for pumping clean water and liquids that are not chemically aggressive for the materials from which the pump is made. It differs from the basic series in having a cast iron pump body.
It has a flow rate that varies from 20 to 200 litres per minute with a head from 34.5 to 94 metres.
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with autoclave tanks, increasing the pressure in the network.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Suction mouth
- 1 "1/2
- Delivery mouth
- 1 "1/2
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Check valve
- No
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 200
- Min. head (m.)
- 34.5
- Max. head (m.)
- 94
- Jobs
- fire prevention systems, washing systems, irrigation, pressurization systems, water supply
- Warranty (years)
- 2
HTM 8 - PRO models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HT5/6PRO series
Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 2.0 - Lid | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 HTm 8/6-PRO - 3 HP single-phase vertical multistage electric pumpThis product Flow rate up to 200 l/min (12 m³/h). Head up to 94 m. Motor 2.2 Kw (3 HP). |  P220-23-50 - Solenoid valve 3"Attack female/female. In reinforced Nylon. With flow regulator. |  P220-23-90 - Solenoid valve 3"Attack female/female. In reinforced Nylon. With latching solenoid. With flow regulator. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection -- | Motor connection -- |
| Power (Kw) | Power (Kw) 2.2 | Power (Kw) -- | Power (Kw) -- |
| Power (HP) | Power (HP) 3 | Power (HP) -- | Power (HP) -- |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth -- | Suction mouth -- |
| Delivery mouth | Delivery mouth 1 "1/2 | Delivery mouth -- | Delivery mouth -- |
| Pump body | Pump body AISI 304 stainless steel | Pump body -- | Pump body -- |
| Impeller | Impeller AISI 304 stainless steel | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 3 | Number of impellers -- | Number of impellers -- |
| Check valve | Check valve No | Check valve -- | Check valve -- |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) -- | Min. flow rate (l./min.) -- |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 200 | Max. flow rate (l./min.) -- | Max. flow rate (l./min.) -- |
| Min. head (m.) | Min. head (m.) 34.5 | Min. head (m.) -- | Min. head (m.) -- |
| Max. head (m.) | Max. head (m.) 94 | Max. head (m.) -- | Max. head (m.) -- |
| Range of application | Range of application -- | Range of application 567.8-1.135.6 l / min | Range of application -- |
| Pressure | Pressure -- | Pressure 0.7-15 bar | Pressure 0.7-15 bar |
| Jobs | Jobs fire prevention systems, washing systems, irrigation, pressurization systems, water supply | Jobs -- | Jobs -- |
| Pressure regulator | Pressure regulator -- | Pressure regulator No | Pressure regulator No |
| Manual flow regulation | Manual flow regulation -- | Manual flow regulation Yes | Manual flow regulation Yes |
| Opening with internal drain | Opening with internal drain -- | Opening with internal drain Yes | Opening with internal drain Yes |
| Self-cleaning device | Self-cleaning device -- | Self-cleaning device Yes | Self-cleaning device Yes |
| Optional Spike-Guard Solenoid | Optional Spike-Guard Solenoid -- | Optional Spike-Guard Solenoid No | Optional Spike-Guard Solenoid No |
| Supply voltage (Volts) | Supply voltage (Volts) -- | Supply voltage (Volts) 24 | Supply voltage (Volts) 9 |
| Height (cm) | Height (cm) -- | Height (cm) 27.3 | Height (cm) 27.3 |
| Width (cm) | Width (cm) -- | Width (cm) 15.6 | Width (cm) 15.6 |
| Attack size | Attack size -- | Attack size 2 - 1 1/4 " | Attack size 2 - 1 1/4 " |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 5 | Warranty (years) 5 |
| Corner connection | Corner connection -- | Corner connection Yes | Corner connection Yes |
| Type of attack | Type of attack -- | Type of attack female / female | Type of attack female / female |
| Body | Body -- | Body Fiberglass | Body Fiberglass |
