HTm 10/3 - 2 HP single-phase vertical multistage electric pump
Flow rate up to 250 l/min (12 m³/h). Head up to 47 m. Motor 1.5 Kw (2 HP).
The HTm 10/3 multi-impeller centrifugal electric pump by Pedrollo is ideal for applications in the domestic, civil, agricultural and industrial fields.
Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The HTm 10/3 electric pump is designed to guarantee high hydraulic performance combined with a robust, compact and reliable mechanical construction.
The high efficiency and adaptability to the most varied applications make it suitable for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 13 to 47 meters.
The HTm 10/3 must be powered by a single-phase voltage, has a horsepower of 2 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made of steel, including the 3 impellers, and cast iron which guarantee a long life and high performance of the pump.
With the multi-stage construction, the operating noise is particularly low.
The HTm 10/3 must be installed indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Employments
- water supply, fire prevention systems, washing systems, pressurization systems, irrigation
- Liquid temperature max. (° C)
- Motor voltage
- 230 V
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 HTm 10/3 - 2 HP single-phase vertical multistage electric pumpThis product Flow rate up to 250 l/min (12 m³/h). Head up to 47 m. Motor 1.5 Kw (2 HP). |  100-PGA - 1"Solenoid valveAttack female/female. With flow regulator. |  4BLOCKm 4/13 (20m) - Single-phase submersible electric pump 1.5 HPFlow rate up to 100 l/min (6 m³/h). Head up to 102 m. 1.1 Kw (1.5 HP) motor. 20 meters of cable. |  4BLOCKm 4/13 (30m) - Single-phase submersible electric pump 1.5 HPFlow rate up to 100 l/min (6 m³/h). Head up to 102 m. 1.1 Kw (1.5 HP) motor. 30 meters of cable. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection -- | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) -- | Power (Kw) 1.1 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1.5 | Power (HP) -- | Power (HP) 1.5 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) 8 | Absorption at 230V (A) 8 |
| Capacitor | Capacitor -- | Capacitor -- | Capacitor 35 µF450 VL | Capacitor 35 µF450 VL |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth -- | Suction mouth -- | Suction mouth -- |
| Delivery port | Delivery port 1 "1/2 | Delivery port -- | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump -- | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller -- | Impeller Delrin | Impeller Lexan |
| Number of impellers | Number of impellers 3 | Number of impellers -- | Number of impellers 13 | Number of impellers 13 |
| Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft -- | Motor shaft -- | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Pump shaft | Pump shaft -- | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft -- |
| Check valve | Check valve no | Check valve -- | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection -- | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) 100 | Max flow (l./min.) 100 |
| Min head (m.) | Min head (m.) -- | Min head (m.) -- | Min head (m.) 32.5 | Min head (m.) 32.5 |
| Max head (m.) | Max head (m.) -- | Max head (m.) -- | Max head (m.) 97 | Max head (m.) 97 |
| Range of reach | Range of reach -- | Range of reach 3.8 at 150 l / min | Range of reach -- | Range of reach -- |
| Pressure | Pressure -- | Pressure 1-10.4 bars | Pressure -- | Pressure -- |
| Cable length (m) | Cable length (m) -- | Cable length (m) -- | Cable length (m) 20 | Cable length (m) 20 |
| Employments | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation | Employments -- | Employments water supply, pressurization systems, irrigation | Employments irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 |
| Pressure regulator | Pressure regulator -- | Pressure regulator no | Pressure regulator -- | Pressure regulator -- |
| Manual flow regulation | Manual flow regulation -- | Manual flow regulation Yes | Manual flow regulation -- | Manual flow regulation -- |
| Opening with internal drain | Opening with internal drain -- | Opening with internal drain Yes | Opening with internal drain -- | Opening with internal drain -- |
| Self-cleaning device | Self-cleaning device -- | Self-cleaning device no | Self-cleaning device -- | Self-cleaning device -- |
| Optional Spike-Guard solenoid | Optional Spike-Guard solenoid -- | Optional Spike-Guard solenoid no | Optional Spike-Guard solenoid -- | Optional Spike-Guard solenoid -- |
| Supply voltage (Volt) | Supply voltage (Volt) -- | Supply voltage (Volt) 24 | Supply voltage (Volt) -- | Supply voltage (Volt) -- |
| Motor voltage | Motor voltage 230 V | Motor voltage -- | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) -- | Height (cm) 18.4 | Height (cm) 92.5 | Height (cm) 92.5 |
| Width (cm) | Width (cm) -- | Width (cm) 8.3 | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) -- | Depth (cm) 14 | Depth (cm) -- | Depth (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) -- | Outside diameter (cm) 10 | Outside diameter (cm) 10 |
| Attack size | Attack size -- | Attack size 1 " | Attack size -- | Attack size -- |
| Weight kg) | Weight kg) -- | Weight kg) -- | Weight kg) 17 | Weight kg) 17 |
| Guarantee | Guarantee 2 | Guarantee 3 | Guarantee 2 | Guarantee 2 |
| Corner connection | Corner connection -- | Corner connection Yes | Corner connection -- | Corner connection -- |
| Type of attack | Type of attack -- | Type of attack female / female | Type of attack -- | Type of attack -- |
| fillet steak | fillet steak -- | fillet steak NPT | fillet steak -- | fillet steak -- |
| Body | Body -- | Body PVC | Body -- | Body -- |
