chevron_left chevron_right
-45%
MKm 8/4 - 1.5 HP single-phase vertical multistage electric pump
Flow rate up to 180 l/min (10.8 m³/h). Head up to 56 m. Motor 1.1 Kw (1.5 HP).
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with autoclave tanks, increasing the pressure in the network.
They are recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8.5
- Capacitor
- 31.5 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery mouth
- 1 "
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 4
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 40
- Max. flow rate (l./min.)
- 180
- Min. head (m.)
- 12
- Max. head (m.)
- 56
- Height (cm)
- 47.7
- Width (cm)
- 18.5
- Depth (cm)
- 22.3
- Weight (Kg)
- 22
- Warranty (years)
- 2
MKm models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the MK series
Bearings
| Pump side motor bearing | 6304 ZZ |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Suction Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | PTFE |
| 5.3 - Diaphragm/Diffuser Cover | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 MKm 8/4 - 1.5 HP single-phase vertical multistage electric pumpThis product Flow rate up to 180 l/min (10.8 m³/h). Head up to 56 m. Motor 1.1 Kw (1.5 HP). |  Royal Blend - 1 kg lawn seedFor overseeding sports and ornamental surfaces. |  Macroseeding - 20 kg lawn seedFor overseeding on microthermal meadows. |  Almaprato Dicondra - Lawn seed 250 gFor all uses. | |
|---|---|---|---|---|
| Loietti blend (%) | Loietti blend (%) -- | Loietti blend (%) 100 | Loietti blend (%) -- | Loietti blend (%) -- |
| Dichondra Repens (%) | Dichondra Repens (%) -- | Dichondra Repens (%) -- | Dichondra Repens (%) -- | Dichondra Repens (%) 100 |
| Sowing months | Sowing months -- | Sowing months Sea, Apr, May, Down, Jul, Needle, Set, Oct, Nov. | Sowing months Gen, Feb, Sea, Apr, May, Set, Oct, Nov., Dec | Sowing months Sea, Apr, May, Needle, Set |
| Areas of use | Areas of use -- | Areas of use Recreation areas, Sports surfaces | Areas of use Ornamental, Sports surfaces | Areas of use Turf areas, Gardens and parks |
| Dosage | Dosage -- | Dosage 30-40 g / m2 | Dosage -- | Dosage -- |
| Motor connection | Motor connection SINGLE PHASE | Motor connection -- | Motor connection -- | Motor connection -- |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) -- | Power (Kw) -- | Power (Kw) -- |
| Power (HP) | Power (HP) 1.5 | Power (HP) -- | Power (HP) -- | Power (HP) -- |
| Absorption at 230V (A) | Absorption at 230V (A) 8.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Capacitor | Capacitor 31.5 µF450 VL | Capacitor -- | Capacitor -- | Capacitor -- |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth -- | Suction mouth -- | Suction mouth -- |
| Delivery mouth | Delivery mouth 1 " | Delivery mouth -- | Delivery mouth -- | Delivery mouth -- |
| Pump body | Pump body AISI 304 stainless steel | Pump body -- | Pump body -- | Pump body -- |
| Impeller | Impeller Noryl | Impeller -- | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 4 | Number of impellers -- | Number of impellers -- | Number of impellers -- |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft -- | Crankshaft -- | Crankshaft -- |
| Check valve | Check valve No | Check valve -- | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 44 | Degree of protection -- | Degree of protection -- | Degree of protection -- |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 40 | Min. flow rate (l./min.) -- | Min. flow rate (l./min.) -- | Min. flow rate (l./min.) -- |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 180 | Max. flow rate (l./min.) -- | Max. flow rate (l./min.) -- | Max. flow rate (l./min.) -- |
| Min. head (m.) | Min. head (m.) 12 | Min. head (m.) -- | Min. head (m.) -- | Min. head (m.) -- |
| Max. head (m.) | Max. head (m.) 56 | Max. head (m.) -- | Max. head (m.) -- | Max. head (m.) -- |
| Species | Species -- | Species microtherm | Species microtherm | Species macrotherm |
| Resistence | Resistence -- | Resistence Great | Resistence Great | Resistence Great |
| Height (cm) | Height (cm) 47.7 | Height (cm) -- | Height (cm) -- | Height (cm) -- |
| Width (cm) | Width (cm) 18.5 | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) 22.3 | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| Weight (Kg) | Weight (Kg) 22 | Weight (Kg) 1 | Weight (Kg) 20 | Weight (Kg) 250g |
| Packaging | Packaging -- | Packaging box | Packaging lot | Packaging box |
| Warranty (years) | Warranty (years) 2 | Warranty (years) -- | Warranty (years) -- | Warranty (years) -- |
