NGA 3D - 1.5 HP three-phase open impeller centrifugal electric pump
Flow rate up to 700 l/min (42 m³/h). Head up to 12.5 m. 1.1 kW (1.5 HP) motor.
Delivery Options
| Carrier | Description | Estimated Delivery | |
|---|---|---|---|
 | Mail Boxes - 2 giorni | This courier delivers within 48 hours from the moment we entrust the products to him. | Thursday 22 October - Friday 23 October |
 | Poste Italiane - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust them with the products. | Thursday 22 October - Friday 23 October |
 | Poste Italiane - 3 giorni punto di ritiro | This courier delivers within 24/72 hours from the moment we entrust them with the products. | Thursday 22 October |
Carrier: Mail Boxes - 2 giorni
Description: This courier delivers within 48 hours from the moment we entrust the products to him.
Estimated delivery:
Thursday 22 October - Friday 23 October
Carrier: Poste Italiane - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust them with the products.
Estimated delivery:
Thursday 22 October - Friday 23 October
Carrier: Poste Italiane - 3 giorni punto di ritiro
Description: This courier delivers within 24/72 hours from the moment we entrust them with the products.
Estimated delivery:
Thursday 22 October
The Pedrollo NGA 3D centrifugal electric pump is recommended for use in the agricultural, domestic and industrial sectors.
Pedrollo designed this pump with an open impeller, allowing it to pump relatively heavy liquids without clogging the impeller. It allows solids up to 12 millimeters in diameter to pass through.
The NGA 3D, due to the open impeller design, is suitable for applications such as transfers from canals, rivers, tanks and basins.
It has a flow rate ranging from 100 to 700 liters and a reach of 5 to 12.5 meters. The pump body supports a maximum working pressure of 10 bar .
- Jobs
- washing systems, water supply
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Pump body
- Cast iron
- Impeller
- AISI 316 Stainless Steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 700
- Min. head (m.)
- 5
- Max. head (m.)
- 12.5
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Degree of protection
- IP 44
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Warranty (years)
- 2
Use and formulation of products
- Jobs
- water supply, washing systems
Engine and mechanical performance
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
Pump components and construction
- Pump body
- Cast iron
- Impeller
- AISI 316 Stainless Steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
Hydraulic performance and filtration
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 700
- Min. head (m.)
- 5
- Max. head (m.)
- 12.5
Liquids and pumping conditions
- Max. liquid temperature (°C)
- +90°C
Power supply and electrical parameters
- Motor voltage
- 400 V
Safety and protection
- Degree of protection
- IP 44
Installation and connections
- Suction mouth
- 2"
- Delivery mouth
- 2"
Packaging, maintenance, and warranty
- Warranty (years)
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 250 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 250 EN 1561 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Related Products
-
ASS14FL0005 - Flange kit DN 50
Threaded 2" X 2". For Pedrollo electric pumps of the NGA 3 and NGA 3-PRO series.
€151.28 -40%€90.77
Compare with Similar Products
 NGA 3D - 1.5 HP three-phase open impeller centrifugal electric pumpThis product Flow rate up to 700 l/min (42 m³/h). Head up to 12.5 m. 1.1 kW (1.5 HP) motor. |  NGA 3D-PRO - 1.5 HP three-phase open impeller electric pump Flow rate up to 700 l/min (42 m³/h). Head up to 12.5 m. 1.1 kW (1.5 HP) motor. | |
|---|---|---|
| Price | Price €717.36 -42% €416.07 | Price €1,350.54 -42% €783.31 |
| Jobs | Jobs washing systems, water supply | Jobs water supply, cooling systems, washing systems, water treatment plants |
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1.5 |
| Pump body | Pump body Cast iron | Pump body AISI 316L stainless steel |
| Impeller | Impeller AISI 316 Stainless Steel | Impeller AISI 316L stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 316 stainless steel |
| Check valve | Check valve No | Check valve No |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 100 | Minimum flow rate (l./min.) 100 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 700 | Max. flow rate (l./min.) 700 |
| Min. head (m.) | Min. head (m.) 5 | Min. head (m.) 5 |
| Max. head (m.) | Max. head (m.) 12.5 | Max. head (m.) 12.5 |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +90°C |
| Motor voltage | Motor voltage 400 V | Motor voltage 400 V |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 |
| Suction mouth | Suction mouth 2" | Suction mouth 2" |
| Delivery mouth | Delivery mouth 2" | Delivery mouth 2" |
| Weight (Kg) | Weight (Kg) -- | Weight (Kg) 21 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 |
