12-H-PC - Fixed angle nozzle 3.7m throw 180 degrees

Telephone support for information before purchasing.

After-sales assistance for product installation.
Description
The 12-H-PC nozzle of the MPR series from Toro Irrigazione allows for homogeneous and proportional water distribution.
The 12-H-PC has a fixed 180 degree angle and a throw of up to 3.7 meters.
Can be installed on any 570 or LPS series pop-up nozzle holder, bush adapter, extension and fixed nozzle holder.
Eliminates overspray, conserves water and delivers precise volumes.
The adjustment screw allows you to reduce the jet by a maximum of 25% and can also be tightened until the nozzle is deactivated.
Data sheet
- Max range (m)
- 3.7
- Working angle
- fixed
- Angolo di lavoro
- 180
- Type of attack
- male
Construction data of the PK 70-80

Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side motor bearing | 6203 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | AR-12 |
LP diameter | 12 |
Fixed ring LP | Ceramic |
Rotating ring LP | Graphite |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Brass CW617N EN 12165 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
![]() 12-H-PC - Fixed angle nozzle 3.7m throw 180 degreesThis product Male attack. | |
---|---|
Max range (m) | Max range (m) 3.7 |
Working angle | Working angle fixed |
Angolo di lavoro | Angolo di lavoro 180 |
Type of attack | Type of attack male |