PQ 3000 - 3 HP three-phase peripheral impeller electric pump
Flow rate up to 50 l/min (3 m³/h). Head up to 180 m. 2.2 Kw (3 HP) motor.
The Pedrollo PQ 3000 electric pump is recommended for industrial use.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Thanks to its hydraulic characteristics, small size and compactness, the PQ 3000 allows for industrial use in very restricted areas in chillers, air conditioning, cooling or boiler power equipment.
The flow rate ranges from 1 to 20 liters per minute. The head ranges from 10 to 95 meters.
The pump's delivery and suction port is 1 inch.
The PQ 3000 must be powered by a three-phase voltage, has a horsepower of 3 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
The maximum supported pressure is 18 bar. The manometric suction height up to 8 meters.
Made of materials such as cast iron, stainless steel, aluminium, bronze, graphite and ceramic, the PQ 3000 is very robust, resistant and guarantees a long life over time.
- Motor connection
- THREE-PHASE
- Motor power (Kw)
- 2.2
- Motor power (HP)
- 3
- Absorption at 230V (A)
- 12.9
- Absorption at 400V (A)
- 7.5
- Suction mouth
- 3/4 "
- Delivery port
- 3/4 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 50
- Min head (m.)
- 50
- Max head (m.)
- 180
- Employments
- water supply
- Liquid temperature max. (° C)
- +90°C
- Motor voltage
- 230 V, 400 V
- Height (cm)
- 21.1
- Width (cm)
- 35.6
- Depth (cm)
- 15.1
- Weight kg)
- 17.2
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ - C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 NU |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 14401 stainless steel (AISI 316) |
| 3.0 - Impeller | Bronze CC483K EN 1982 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PQ 3000 - 3 HP three-phase peripheral impeller electric pumpThis product Flow rate up to 50 l/min (3 m³/h). Head up to 180 m. 2.2 Kw (3 HP) motor. |  PQ 3000-MF - 3 HP three-phase peripheral impeller electric pumpFlow rate up to 50 l/min (3 m³/h). Head up to 180 m. 2.2 Kw (3 HP) motor. | |
|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (Kw) | Motor power (Kw) 2.2 | Motor power (Kw) 2.2 |
| Motor power (HP) | Motor power (HP) 3 | Motor power (HP) 3 |
| Absorption at 230V (A) | Absorption at 230V (A) 12.9 | Absorption at 230V (A) 12.9 |
| Absorption at 400V (A) | Absorption at 400V (A) 7.5 | Absorption at 400V (A) 7.5 |
| Suction mouth | Suction mouth 3/4 " | Suction mouth 3/4 " |
| Delivery port | Delivery port 3/4 " | Delivery port 3/4 " |
| Body Pump | Body Pump Cast iron | Body Pump AISI 316 stainless steel |
| Impeller | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 50 | Max flow (l./min.) 50 |
| Min head (m.) | Min head (m.) 50 | Min head (m.) 50 |
| Max head (m.) | Max head (m.) 180 | Max head (m.) 180 |
| Employments | Employments water supply | Employments water supply |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) 90 |
| Motor voltage | Motor voltage 230 V, 400 V | Motor voltage 230 V, 400 V |
| Height (cm) | Height (cm) 21.1 | Height (cm) 21.1 |
| Width (cm) | Width (cm) 35.6 | Width (cm) 34.7 |
| Depth (cm) | Depth (cm) 15.1 | Depth (cm) 15.1 |
| Weight kg) | Weight kg) 17.2 | Weight kg) 17.2 |
| Guarantee | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Il cliente non ha lasciato alcun commento.
