PQ 3000-MF - 3 HP three-phase peripheral impeller electric pump
Flow rate up to 50 l/min (3 m³/h). Head up to 180 m. 2.2 Kw (3 HP) motor.
The Pedrollo PQ 3000-MF electric pump is recommended for industrial use.
It differs from the PQ 3000 pump in that the pump body of the PQ 3000-MF is made of AISI 316 stainless steel instead of cast iron.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PQ 3000-MF, thanks to its hydraulic characteristics and small size, allows for use in industrial environments in chillers, air conditioning, cooling or boiler feeding equipment.
The flow rate ranges from 5 to 50 liters per minute. The head ranges from 50 to 180 meters.
The pump's delivery and suction port is 1 inch.
The PQ 3000-MF must be powered by a three-phase voltage, has a horsepower of 3 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
The maximum supported pressure is 18 bar. The manometric suction height is up to 8 meters.
Made of materials such as stainless steel, aluminum, bronze, graphite and ceramic, the PQ 3000-MF is very robust, resistant and guarantees a long life over time.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 12.9
- Absorption at 400V (A)
- 7.5
- Suction mouth
- 3/4 "
- Delivery port
- 3/4 "
- Body Pump
- AISI 316 stainless steel
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 50
- Min head (m.)
- 50
- Max head (m.)
- 180
- Employments
- water supply
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 230 V, 400 V
- Height (cm)
- 21.1
- Width (cm)
- 34.7
- Depth (cm)
- 15.1
- Weight kg)
- 17.2
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ - C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 NU |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 14401 stainless steel (AISI 316) |
| 3.0 - Impeller | Bronze CC483K EN 1982 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PQ 3000-MF - 3 HP three-phase peripheral impeller electric pumpThis product Flow rate up to 50 l/min (3 m³/h). Head up to 180 m. 2.2 Kw (3 HP) motor. | |
|---|---|
| Motor connection | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 2.2 |
| Power (HP) | Power (HP) 3 |
| Absorption at 230V (A) | Absorption at 230V (A) 12.9 |
| Absorption at 400V (A) | Absorption at 400V (A) 7.5 |
| Suction mouth | Suction mouth 3/4 " |
| Delivery port | Delivery port 3/4 " |
| Body Pump | Body Pump AISI 316 stainless steel |
| Impeller | Impeller Brass |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 55 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 50 |
| Min head (m.) | Min head (m.) 50 |
| Max head (m.) | Max head (m.) 180 |
| Employments | Employments water supply |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 |
| Motor voltage | Motor voltage 230 V, 400 V |
| Height (cm) | Height (cm) 21.1 |
| Width (cm) | Width (cm) 34.7 |
| Depth (cm) | Depth (cm) 15.1 |
| Weight kg) | Weight kg) 17.2 |
| Guarantee | Guarantee 2 |
Reviews (1) - Review moderation
Il cliente non ha lasciato alcun commento.
