4HR10/20 - HYD - 250 litre submersible pump
Flow rate up to 250 l/min (1.8 m³/h). Head up to 115 metres.
WITHOUT ENGINE.
Original spare part for 4HR10/20.
The PEDROLLO 4HR10/20 - HYD submersible pump is recommended for pumping clean water with a sand content not exceeding 150 grams per cubic metre.
It has a flow rate that varies from 50 to 250 litres per minute with a head of 28 to 115 metres.
Due to their high performance and reliability, they are suitable for use in domestic, civil and industrial fields, for the distribution of water in combination with pressure tanks, for irrigation, for washing systems, for pressure raising and for fire-fighting systems.
Original spare part for 4HR10/20.
- Power (HP)
- 4
- Delivery port
- 2"
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 20
- Pump shaft
- AISI 304 stainless steel
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 250
- Min head (m.)
- 28
- Max head (m.)
- 115
- Height (cm)
- 160.9
- Outside diameter (cm)
- Guarantee
- 2
Compare with Similar Products
 4HR10/20 - HYD - 250 litre submersible pumpThis product Flow rate up to 250 l/min (1.8 m³/h). Head up to 115 metres. WITHOUT ENGINE. Original spare part for 4HR10/20. |  S110040025 - reduced coupling compression 40 x 25 |  S110025016 - Sleeve reduced compression 25 x 16 |  S110050032 - reduced coupling compression 50 x 32 | |
|---|---|---|---|---|
| Power (HP) | Power (HP) 4 | Power (HP) -- | Power (HP) -- | Power (HP) -- |
| Delivery port | Delivery port 2" | Delivery port -- | Delivery port -- | Delivery port -- |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump -- | Body Pump -- | Body Pump -- |
| Impeller | Impeller AISI 304 stainless steel | Impeller -- | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 20 | Number of impellers -- | Number of impellers -- | Number of impellers -- |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft -- | Pump shaft -- | Pump shaft -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 250 | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 28 | Min head (m.) -- | Min head (m.) -- | Min head (m.) -- |
| Max head (m.) | Max head (m.) 115 | Max head (m.) -- | Max head (m.) -- | Max head (m.) -- |
| Height (cm) | Height (cm) 160.9 | Height (cm) -- | Height (cm) -- | Height (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) -- | Outside diameter (cm) -- | Outside diameter (cm) -- |
| Guarantee | Guarantee 2 | Guarantee -- | Guarantee -- | Guarantee -- |
| Type of fitting | Type of fitting -- | Type of fitting Sleeve | Type of fitting Sleeve | Type of fitting Sleeve |