JSWm 3BH - 2 HP Single Phase Self-Priming Electric Pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 73 m. 1.5 Kw (2 HP) motor.
It is recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The JSW self-priming pump is designed to suck water even in the presence of air mixed with the pumped liquid.
Due to its reliability and ease of use, it is recommended for domestic use, especially for water distribution in conjunction with small or medium-sized pressure tanks, for irrigation of vegetable gardens and gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 9.5
- Capacitor
- 31.5 µF 450 VL
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 38
- Max. head (m.)
- 73
- Jobs
- water supply, pressurization systems, irrigation, washing systems, tank transfer, fire prevention systems
- Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 24.1
- Width (cm)
- 20.6
- Depth (cm)
- 52.2
- Weight (Kg)
- 26.5
- Warranty (years)
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 3.1 - Ejector group | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
 JSWm 3BH - 2 HP Single Phase Self-Priming Electric PumpThis product Flow rate up to 80 l/min (4.8 m³/h). Head up to 73 m. 1.5 Kw (2 HP) motor. |  JSWm 3BM - 2 HP Single Phase Self-Priming Electric PumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 63 m. 1.5 Kw (2 HP) motor. |  JSWm 3BL - 2 HP Single Phase Self-Priming Electric PumpFlow rate up to 160 l/min (9.6 m³/h). Head up to 51 m. 1.5 Kw (2 HP) motor. |  PLURIJETm 6/90 - 2 HP single-phase self-priming multi-impeller electric pumpFlow rate up to 90 l/min (5.4 m³/h). Head up to 96 m. 1.5 Kw (2 HP) motor. |  PLURIJETm 4/130 - 2 HP single-phase self-priming multi-impeller electric pumpFlow rate up to 130 l/min (7.8 m³/h). Head up to 65 m. 1.5 Kw (2 HP) motor. | |
|---|---|---|---|---|---|
| Price | Price €602.68 -42% €349.55 | Price €602.68 -42% €349.55 | Price €602.68 -42% €349.55 | Price €1,017.48 -42% €590.14 | Price €1,017.48 -42% €590.14 |
| Motor connection | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE |
| Power (Kw) | Power (Kw) 1.5 | Power (Kw) 1.5 | Power (Kw) 1.5 | Power (Kw) 1.1 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 2 | Power (HP) 2 | Power (HP) 2 | Power (HP) 2 | Power (HP) 2 |
| Absorption at 230V (A) | Absorption at 230V (A) 9.5 | Absorption at 230V (A) 9.7 | Absorption at 230V (A) -- | Absorption at 230V (A) 10.5 | Absorption at 230V (A) 10.5 |
| Capacitor | Capacitor 31.5 µF 450 VL | Capacitor 45 µF 450 VL | Capacitor -- | Capacitor 45 µF 450 VL | Capacitor 45 µF 450 VL |
| Suction mouth | Suction mouth 1" 1/4 | Suction mouth 1" 1/4 | Suction mouth -- | Suction mouth 1" 1/4 | Suction mouth 1" 1/4 |
| Delivery mouth | Delivery mouth 1" | Delivery mouth 1" | Delivery mouth -- | Delivery mouth 1" | Delivery mouth 1" |
| Pump body | Pump body Cast iron | Pump body Cast iron | Pump body -- | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel |
| Impeller | Impeller Brass | Impeller Brass | Impeller -- | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers -- | Number of impellers 6 | Number of impellers 4 |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft -- | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No | Check valve No | Check valve -- | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection -- | Degree of protection IP 44 | Degree of protection IP 44 |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 10 | Minimum flow rate (l./min.) 20 | Minimum flow rate (l./min.) 30 | Minimum flow rate (l./min.) 5 | Minimum flow rate (l./min.) 5 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 80 | Max. flow rate (l./min.) 120 | Max. flow rate (l./min.) 160 | Max. flow rate (l./min.) 90 | Max. flow rate (l./min.) 130 |
| Min. head (m.) | Min. head (m.) 38 | Min. head (m.) 30 | Min. head (m.) 24 | Min. head (m.) 45 | Min. head (m.) 31 |
| Max. head (m.) | Max. head (m.) 73 | Max. head (m.) 63 | Max. head (m.) 51 | Max. head (m.) 96 | Max. head (m.) 65 |
| Jobs | Jobs water supply, pressurization systems, irrigation, washing systems, tank transfer, fire prevention systems | Jobs water supply, pressurization systems, irrigation, washing systems, tank transfer, fire prevention systems | Jobs -- | Jobs water supply, pressurization systems, irrigation | Jobs water supply, pressurization systems, irrigation |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C |
| Height (cm) | Height (cm) 24.1 | Height (cm) 24.1 | Height (cm) -- | Height (cm) 22.8 | Height (cm) 22.8 |
| Width (cm) | Width (cm) 20.6 | Width (cm) 20.6 | Width (cm) -- | Width (cm) 57.5 | Width (cm) 52.3 |
| Depth (cm) | Depth (cm) 52.2 | Depth (cm) 52.2 | Depth (cm) -- | Depth (cm) 18.5 | Depth (cm) 18.5 |
| Weight (Kg) | Weight (Kg) 26.5 | Weight (Kg) 26.5 | Weight (Kg) 26.5 | Weight (Kg) 22.7 | Weight (Kg) 19.7 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) -- | Warranty (years) 2 | Warranty (years) 2 |
Reviews (1) - Review moderation
Bonjour Je viens d'être livré ce jour vers 13H. La pompe est conforme à mon achat mais livrée ABIMEE Tout d'abord le livreur n'a pas voulu ouvrir le colis avec moi, prétextant qu'il n'avait pas de temps à perdre . J'ai donc refusé de prendre le colis et il est reparti. Puis il est revenu et après ouverture nous avons constaté que le cache de la pompe arrière était arraché et le carter qui le soutient tordu. Ceci a donc été consigné dur le bordereau de livraison avec nos signatures. Il a fallu que la pompe reçoive un gros choc pour que le carter arrière soit tordu. La pompe a l'air de fonctionner malgré tout Je ne mets qu'une étoile à cause de la livraison Que fais-t-on maintenant, que proposez vous? Cordialement D ROBIN
Already reported
