PLURIJETm 4/90 - 0.75 HP single-phase self-priming multi-impeller electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 52 m. 0.55 Kw (0.75 HP) motor.
Delivery Options
| Carrier | Description | Estimated Delivery | |
|---|---|---|---|
 | Mail Boxes - 2 giorni | This courier delivers within 48 hours from the moment we entrust the products to him. | Tuesday 27 October - Wednesday 28 October |
 | Poste Italiane - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust them with the products. | Tuesday 27 October - Wednesday 28 October |
 | DHL - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust the products to him. | Tuesday 27 October - Wednesday 28 October |
 | Poste Italiane - 3 giorni punto di ritiro | This courier delivers within 24/72 hours from the moment we entrust them with the products. | Tuesday 27 October |
Carrier: Mail Boxes - 2 giorni
Description: This courier delivers within 48 hours from the moment we entrust the products to him.
Estimated delivery:
Tuesday 27 October - Wednesday 28 October
Carrier: Poste Italiane - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust them with the products.
Estimated delivery:
Tuesday 27 October - Wednesday 28 October
Carrier: DHL - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust the products to him.
Estimated delivery:
Tuesday 27 October - Wednesday 28 October
Carrier: Poste Italiane - 3 giorni punto di ritiro
Description: This courier delivers within 24/72 hours from the moment we entrust them with the products.
Estimated delivery:
Tuesday 27 October
-
Telephone support for information before purchasing. -
Reinforced packaging to reduce transport damage. -
After-sales assistance for product installation. -
We supply all spare parts on this product.
The PLURIJETm 4/90 self-priming electric pump by Pedrollo is the ideal solution for a versatile, efficient, resistant and silent pump.
Recommended for sucking clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The PLURIJETm 4/90 is recommended for use in the domestic sector, particularly for the pressurization and distribution of water in combination with pressure tanks, for the recovery of rainwater and for irrigation systems.
The flow rate ranges from 5 to 80 liters per minute. The head ranges from 5 to 38 meters.
It must be powered by a single-phase voltage, has a horsepower of 0.75 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to 60.
The PLURIJETm 4/90 pump is versatile thanks to its excellent suction capacity which can guarantee priming up to 9 metres deep.
It can significantly reduce electricity consumption while still ensuring sufficient water quantity.
Stainless steel components ensure reliability and durability over time.
The PLURIJETm 4/90 is ideal for the domestic sector thanks to the fact that it is very quiet. Characterized by a multicellular hydraulic system that guarantees maximum pressure with minimum absorbed power, while reducing turbulence, an inevitable source of noise.
- Jobs
- water supply, pressurization systems, irrigation
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.9
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 4
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 10
- Max. head (m.)
- 52
- Max. liquid temperature (°C)
- +60°C
- Degree of protection
- IP 44
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Height (cm)
- 17.1
- Width (cm)
- 16
- Depth (cm)
- 38.3
- Weight (Kg)
- 9.7
- Warranty (years)
- 2
Use and formulation of products
- Jobs
- water supply, pressurization systems, irrigation
Engine and mechanical performance
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.9
Pump components and construction
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 4
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
Hydraulic performance and filtration
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 10
- Max. head (m.)
- 52
Liquids and pumping conditions
- Max. liquid temperature (°C)
- +60°C
Safety and protection
- Degree of protection
- IP 44
Installation and connections
- Suction mouth
- 1"
- Delivery mouth
- 1"
Dimensions and weight
- Height (cm)
- 17.1
- Width (cm)
- 16
- Depth (cm)
- 38.3
- Weight (Kg)
- 9.7
Packaging, maintenance, and warranty
- Warranty (years)
- 2
Compare with Similar Products
 PLURIJETm 4/90 - 0.75 HP single-phase self-priming multi-impeller electric pumpThis product Flow rate up to 80 l/min (4.8 m³/h). Head up to 52 m. 0.55 Kw (0.75 HP) motor. |  FUTURE JET 1A - 0.75 HP three-phase self-priming electric pump Flow rate up to 100 l/min (6 m³/h). Head up to 48 m. 0.55 Kw (0.75 HP) motor. |  FUTURE JET 1A-ST - 0.75 HP three-phase self-priming electric pump Flow rate up to 100 l/min (6 m³/h). Head up to 48 m. 0.55 Kw (0.75 HP) motor. | |
|---|---|---|---|
| Price | Price €467.26 -42% €271.01 | Price €297.68 -42% €172.65 | Price €311.10 -42% €180.44 |
| Jobs | Jobs water supply, pressurization systems, irrigation | Jobs water supply, pressurization systems, irrigation | Jobs water supply, pressurization systems, irrigation |
| Motor connection | Motor connection SINGLE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) 0.55 | Power (Kw) 0.55 |
| Power (HP) | Power (HP) 0.75 | Power (HP) 0.75 | Power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 3.9 | Absorption at 230V (A) 2.8 | Absorption at 230V (A) 2.8 |
| Capacitor | Capacitor -- | Capacitor 12 µF 450 VL | Capacitor 14 µF 450 VL |
| Pump body | Pump body AISI 304 stainless steel | Pump body Cast iron | Pump body AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 4 | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel |
| Check valve | Check valve No | Check valve -- | Check valve No |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 5 | Minimum flow rate (l./min.) 5 | Minimum flow rate (l./min.) 5 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 80 | Max. flow rate (l./min.) 100 | Max. flow rate (l./min.) 100 |
| Min. head (m.) | Min. head (m.) 10 | Min. head (m.) 9 | Min. head (m.) 9 |
| Max. head (m.) | Max. head (m.) 52 | Max. head (m.) 48 | Max. head (m.) 48 |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +60°C | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) +40°C |
| Degree of protection | Degree of protection IP 44 | Degree of protection -- | Degree of protection IP 44 |
| Suction mouth | Suction mouth 1" | Suction mouth 1" | Suction mouth 1" |
| Delivery mouth | Delivery mouth 1" | Delivery mouth 1" | Delivery mouth 1" |
| Height (cm) | Height (cm) 17.1 | Height (cm) 17.1 | Height (cm) 18.3 |
| Width (cm) | Width (cm) 16 | Width (cm) 35.7 | Width (cm) 18.2 |
| Depth (cm) | Depth (cm) 38.3 | Depth (cm) 15.8 | Depth (cm) 36.7 |
| Weight (Kg) | Weight (Kg) 9.7 | Weight (Kg) 9.7 | Weight (Kg) 7.6 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |
