PLURIJETm 6/90 - 2 HP single-phase self-priming multi-impeller electric pump
Flow rate up to 90 l/min (5.4 m³/h). Head up to 96 m. 1.5 Kw (2 HP) motor.
Order it before 46 minutes and receive it between 30-12-2024 and 31-12-2024 with SDA - 2 giorni Italia
The PLURIJET self-priming pumps are designed to suck water even in the presence of air mixed with the pumped liquid.
Due to their silence, reliability and low energy consumption, they are recommended for domestic and civil use, in particular for the pressurization and distribution of water in combination with pressure tanks, for the recovery of rainwater, for irrigation systems, etc.
They are recommended for sucking clean water even in the presence of air mixed with the pumped liquid and liquids that are chemically non-aggressive for the materials constituting the pump.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 2
- Absorption at 230V (A)
- 10.5
- Capacitor
- 45 µF450 VL
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 6
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 80
- Min head (m.)
- 43
- Max head (m.)
- 93
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 22.8
- Width (cm)
- 57.5
- Depth (cm)
- 18.5
- Weight kg)
- 22.7
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6304 2RS-C3 |
Opposite side engine bearing | 6204 ZZ-C3E |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | FN-18 |
LP diameter | 18 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
2.1 - Seal holder cover | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
5.2 - Wear ring | PTFE |
6.0 - Motor carrier | EN-AB 46100 aluminium |
7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
PLURIJETm 6/90 - 2 HP single-phase self-priming multi-impeller electric pumpThis product Flow rate up to 90 l/min (5.4 m³/h). Head up to 96 m. 1.5 Kw (2 HP) motor. | PLURIJETm 5/90 - 1.5 HP single-phase self-priming multi-impeller electric pumpFlow rate up to 90 l/min (5.4 m³/h). Head up to 80 m. 1.1 Kw (1.5 HP) motor. | PLURIJETm 3/130 - 1.5 HP single-phase self-priming multi-impeller electric pumpFlow rate up to 130 l/min (7.8 m³/h). Head up to 49 m. 1.1 Kw (1.5 HP) motor. | PLURIJETm 4/130 - 2 HP single-phase self-priming multi-impeller electric pumpFlow rate up to 130 l/min (7.8 m³/h). Head up to 65 m. 1.5 Kw (2 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Power (Kw) | Power (Kw) 1.1 | Power (Kw) 1.1 | Power (Kw) 1.1 | Power (Kw) 1.1 |
Power (HP) | Power (HP) 2 | Power (HP) 1.5 | Power (HP) 1.5 | Power (HP) 2 |
Absorption at 230V (A) | Absorption at 230V (A) 10.5 | Absorption at 230V (A) 8.5 | Absorption at 230V (A) 8.5 | Absorption at 230V (A) 10.5 |
Capacitor | Capacitor 45 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor 45 µF450 VL |
Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 | Suction mouth 1 "1/4 |
Delivery port | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " | Delivery port 1 " |
Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump Cast iron and AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 6 | Number of impellers 5 | Number of impellers 3 | Number of impellers 4 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
Max flow (l./min.) | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 130 | Max flow (l./min.) 130 |
Min head (m.) | Min head (m.) 43 | Min head (m.) 33 | Min head (m.) 24 | Min head (m.) 31 |
Max head (m.) | Max head (m.) 93 | Max head (m.) 76 | Max head (m.) 49 | Max head (m.) 65 |
Employments | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 22.8 | Height (cm) 22.8 | Height (cm) 22.8 | Height (cm) 22.8 |
Width (cm) | Width (cm) 57.5 | Width (cm) 18.5 | Width (cm) 18.5 | Width (cm) 52.3 |
Depth (cm) | Depth (cm) 18.5 | Depth (cm) 54.9 | Depth (cm) 49.7 | Depth (cm) 18.5 |
Weight kg) | Weight kg) 22.7 | Weight kg) 19.4 | Weight kg) 17.6 | Weight kg) 19.7 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |