chevron_left chevron_right
F 65/125C - 5.5 HP three-phase standardized centrifugal electric pump
Flow rate up to 1800 l/min (108 m³/h). Head up to 16 m. 4 Kw (5.5 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
The Pedrollo F 65/125C electric pump is used for water supply, washing systems, pressurization, fire-fighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 5.5
- Absorption at 230V (A)
- 17.5
- Absorption at 400V (A)
- 10.0
- Suction mouth
- 3 "
- Delivery port
- 2 "1/2
- Body Pump
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 700
- Min head (m.)
- 20
- Max head (m.)
- 38
- Employments
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 34
- Width (cm)
- 51.1
- Weight kg)
- 53.5
- Guarantee
- 2
Models and performances F 65/125
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 32-40/200-50/160-65/125
Bearings
| Pump side motor bearing | 6307 ZZ-C3 |
| Opposite side engine bearing | 6206 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-24 |
| LP diameter | 24 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
 F 65/125C - 5.5 HP three-phase standardized centrifugal electric pumpThis product Flow rate up to 1800 l/min (108 m³/h). Head up to 16 m. 4 Kw (5.5 HP) motor. |  F 65/125B - centrifugal electric Pump of the normalized three-phaseFlow rates up to 2000 l/min (120 m3/h). Head up to 18 m. Motor 5.5 Kw (7.5 HP). |  F 65/125A - centrifugal electric Pump of the normalized three-phaseFlow rate up to 2200 l/min (132 m3/h). Head up to 23 m. Motor 7.5 Kw (10 HP). |  F 65/160C - 12.5 HP three-phase standardized centrifugal electric pumpFlow rate up to 2200 l/min (132 m³/h). Head up to 32 m. 9.2 Kw (12.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Motor power (HP) | Motor power (HP) 5.5 | Motor power (HP) 7.5 | Motor power (HP) 10 | Motor power (HP) 12.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 17.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 10.0 | Absorption at 400V (A) 12.0 | Absorption at 400V (A) 16.5 | Absorption at 400V (A) 19.0 |
| Suction mouth | Suction mouth 3 " | Suction mouth 3 " | Suction mouth 3 " | Suction mouth 3 " |
| Delivery port | Delivery port 2 "1/2 | Delivery port 2 "1/2 | Delivery port 2 "1/2 | Delivery port 2 "1/2 |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 |
| Max flow (l./min.) | Max flow (l./min.) 700 | Max flow (l./min.) 700 | Max flow (l./min.) 700 | Max flow (l./min.) 700 |
| Min head (m.) | Min head (m.) 20 | Min head (m.) 28 | Min head (m.) 41 | Min head (m.) 47 |
| Max head (m.) | Max head (m.) 38 | Max head (m.) 47 | Max head (m.) 55 | Max head (m.) 64 |
| Employments | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
| Height (cm) | Height (cm) 34 | Height (cm) 34 | Height (cm) 34 | Height (cm) 36 |
| Width (cm) | Width (cm) 51.1 | Width (cm) 55.7 | Width (cm) 55.7 | Width (cm) 62.1 |
| Weight kg) | Weight kg) 53.5 | Weight kg) 56.8 | Weight kg) 63.3 | Weight kg) 98.3 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |