F 65/125C - Standardized three-phase centrifugal electric pump
Flow rate up to 1800 l/min (108 m³/h). Head up to 16 m. 4 kW (5.5 HP) engine.
![Telephone support for information before purchasing.](/modules/itemproduct/views/img/product_item/15_small_2.png)
![Reinforced packaging to reduce transport damage.](/modules/itemproduct/views/img/product_item/3_small_2.png)
![After-sales assistance for product installation.](/modules/itemproduct/views/img/product_item/20_small_2.png)
The Pedrollo F 65/125C electric pump is used for water supply, washing systems, pressurization, fire prevention systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
The installation must be carried out in closed places or in any case protected from the weather.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 5.5
- Absorption at 230V (A)
- 17.5
- Absorption at 400V (A)
- 10.0
- Suction mouth
- 3 "
- Delivery port
- 2 "1/2
- Body Pump
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 700
- Min head (m.)
- 20
- Max head (m.)
- 38
- Employments
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 34
- Width (cm)
- 51.1
- Weight kg)
- 53.5
- Guarantee
- 2
|
|
|
|
|
![F pump cutaway](https://pratoerboso.com/img/cms/sezioni/F2-S_SEZ_0.jpg)
Bearings
Pump side motor bearing | 6307 ZZ-C3 |
Opposite side engine bearing | 6206 ZZ-C3 |
Tree holding
Type of seal | Single Mechanical Seal |
Shrinkage DN1=450 DN2=350 | FN-24 |
LP diameter | 24 |
LP fixed ring | Graphite |
LP rotating ring | Ceramic |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | EN-AB 46100 aluminium |
6.1 - Engine cover | EN-AB 46100 aluminium |
7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
![]() F 65/125C - Standardized three-phase centrifugal electric pumpThis product Flow rate up to 1800 l/min (108 m³/h). Head up to 16 m. 4 kW (5.5 HP) engine. | ![]() F 65/125B - centrifugal electric Pump of the normalized three-phaseFlow rates up to 2000 l/min (120 m3/h). Head up to 18 m. Motor 5.5 Kw (7.5 HP). | ![]() F 65/125A - centrifugal electric Pump of the normalized three-phaseFlow rate up to 2200 l/min (132 m3/h). Head up to 23 m. Motor 7.5 Kw (10 HP). | ![]() F 65/160C - centrifugal electric Pump of the normalized three-phaseFlow rate up to 2200 l/min (132 m3/h). Head up to 32 m. Motor 9.2 Kw (12.5 HP). | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 5.5 | Motor power (HP) 7.5 | Motor power (HP) 10 | Motor power (HP) 12.5 |
Absorption at 230V (A) | Absorption at 230V (A) 17.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
Absorption at 400V (A) | Absorption at 400V (A) 10.0 | Absorption at 400V (A) 12.0 | Absorption at 400V (A) 16.5 | Absorption at 400V (A) 19.0 |
Suction mouth | Suction mouth 3 " | Suction mouth 3 " | Suction mouth 3 " | Suction mouth 3 " |
Delivery port | Delivery port 2 "1/2 | Delivery port 2 "1/2 | Delivery port 2 "1/2 | Delivery port 2 "1/2 |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 |
Max flow (l./min.) | Max flow (l./min.) 700 | Max flow (l./min.) 700 | Max flow (l./min.) 700 | Max flow (l./min.) 700 |
Min head (m.) | Min head (m.) 20 | Min head (m.) 28 | Min head (m.) 41 | Min head (m.) 47 |
Max head (m.) | Max head (m.) 38 | Max head (m.) 47 | Max head (m.) 55 | Max head (m.) 64 |
Employments | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 90 |
Height (cm) | Height (cm) 34 | Height (cm) 34 | Height (cm) 34 | Height (cm) 36 |
Width (cm) | Width (cm) 51.1 | Width (cm) 55.7 | Width (cm) 55.7 | Width (cm) 62.1 |
Weight kg) | Weight kg) 53.5 | Weight kg) 56.8 | Weight kg) 63.3 | Weight kg) 98.3 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |