chevron_left chevron_right
-42%
F 50/125C - 3 HP three-phase standardized centrifugal electric pump
Flow rate up to 1200 l/min (72 m³/h). Head up to 18.5 m. 2.2 Kw (3 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
Used for water supply, washing systems, pressurization, fire-fighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 9.4
- Absorption at 400V (A)
- 5.4
- Suction mouth
- 2 "1/2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Min. flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 1200
- Min. head (m.)
- 6
- Max. head (m.)
- 18.5
- Jobs
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems
- Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 29.2
- Width (cm)
- 45.1
- Depth (cm)
- 24.2
- Weight (Kg)
- 35.1
- Warranty (years)
- 2
Models and performances F 50/125
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 32/160A-50/125
Bearings
| Pump side motor bearing | 6206 ZZ-C3 |
| Opposite side engine bearing | 6205 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-20 |
| LP diameter | 20 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
 F 50/125C - 3 HP three-phase standardized centrifugal electric pumpThis product Flow rate up to 1200 l/min (72 m³/h). Head up to 18.5 m. 2.2 Kw (3 HP) motor. |  F 50/125B - 4 HP three-phase standardized centrifugal electric pumpFlow rate up to 1200 l/min (72 m³/h). Head up to 21.5 m. 3 Kw (4 HP) motor. |  F 50/125A - 5.5 HP three-phase standardized centrifugal electric pumpFlow rate up to 1200 l/min (72 m³/h). Head up to 24.5 m. 4 Kw (5.5 HP) motor. |  F 50/160C - 5.5 HP three-phase standardized centrifugal electric pumpFlow rate up to 1000 l/min (60 m³/h). Head up to 27 m. 4 Kw (5.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 2.2 | Power (Kw) 3 | Power (Kw) 4 | Power (Kw) 4 |
| Power (HP) | Power (HP) 3 | Power (HP) 4 | Power (HP) 5.5 | Power (HP) 5.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 9.4 | Absorption at 230V (A) 12.0 | Absorption at 230V (A) 16.3 | Absorption at 230V (A) 15.8 |
| Absorption at 400V (A) | Absorption at 400V (A) 5.4 | Absorption at 400V (A) 6.9 | Absorption at 400V (A) 9.4 | Absorption at 400V (A) 9.1 |
| Suction mouth | Suction mouth 2 "1/2 | Suction mouth 2 "1/2 | Suction mouth 2 "1/2 | Suction mouth 2 "1/2 |
| Delivery mouth | Delivery mouth 2" | Delivery mouth 2" | Delivery mouth 2" | Delivery mouth 2" |
| Pump body | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No | Check valve No | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 100 | Min. flow rate (l./min.) 100 | Min. flow rate (l./min.) 100 | Min. flow rate (l./min.) 300 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 1200 | Max. flow rate (l./min.) 1200 | Max. flow rate (l./min.) 1200 | Max. flow rate (l./min.) 1000 |
| Min. head (m.) | Min. head (m.) 6 | Min. head (m.) 9 | Min. head (m.) 13 | Min. head (m.) 16 |
| Max. head (m.) | Max. head (m.) 18.5 | Max. head (m.) 21.5 | Max. head (m.) 24.5 | Max. head (m.) 27 |
| Jobs | Jobs water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Jobs water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Jobs water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Jobs water supply, pressurization systems, air conditioning systems, washing systems, fire prevention systems |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 |
| Height (cm) | Height (cm) 29.2 | Height (cm) 29.2 | Height (cm) 29.2 | Height (cm) 34 |
| Width (cm) | Width (cm) 45.1 | Width (cm) 46.5 | Width (cm) 48.4 | Width (cm) 48.9 |
| Depth (cm) | Depth (cm) 24.2 | Depth (cm) 24.2 | Depth (cm) 24.2 | Depth (cm) 26.9 |
| Weight (Kg) | Weight (Kg) 35.1 | Weight (Kg) 38.5 | Weight (Kg) 42.8 | Weight (Kg) 47.3 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |