chevron_left chevron_right
-42%
F 65/125C - 5.5 HP three-phase standardized centrifugal electric pump
Flow rate up to 1800 l/min (108 m³/h). Head up to 16 m. 4 Kw (5.5 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The Pedrollo F 65/125C electric pump is used for water supply, washing systems, pressurization, fire-fighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Absorption at 230V (A)
- 17.5
- Absorption at 400V (A)
- 10.0
- Suction mouth
- 3 "
- Delivery mouth
- 2 "1/2
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Min. flow rate (l./min.)
- 600
- Max. flow rate (l./min.)
- 1800
- Min. head (m.)
- 11
- Max. head (m.)
- 16
- Jobs
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems
- Max. liquid temperature (°C)
- 90
- Height (cm)
- 34
- Width (cm)
- 51.1
- Weight (Kg)
- 53.2
- Warranty (years)
- 2
Models and performances F 65/125
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 32-40/200-50/160-65/125
Bearings
| Pump side motor bearing | 6307 ZZ-C3 |
| Opposite side engine bearing | 6206 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-24 |
| LP diameter | 24 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Compare with Similar Products
 F 65/125C - 5.5 HP three-phase standardized centrifugal electric pumpThis product Flow rate up to 1800 l/min (108 m³/h). Head up to 16 m. 4 Kw (5.5 HP) motor. |  F 65/125B - 7.5 HP three-phase standardized centrifugal electric pumpFlow rate up to 2000 l/min (120 m³/h). Head up to 18 m. 5.5 Kw (7.5 HP) motor. |  F 65/125A - 10 HP three-phase standardized centrifugal electric pumpFlow rate up to 2200 l/min (132 m³/h). Head up to 23 m. 7.5 Kw (10 HP) motor. |  F 65/160C - 12.5 HP three-phase standardized centrifugal electric pumpFlow rate up to 2200 l/min (132 m³/h). Head up to 32 m. 9.2 Kw (12.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 4 | Power (Kw) 5.5 | Power (Kw) 7.5 | Power (Kw) 9.2 |
| Power (HP) | Power (HP) 5.5 | Power (HP) 7.5 | Power (HP) 10 | Power (HP) 12.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 17.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 10.0 | Absorption at 400V (A) 12.0 | Absorption at 400V (A) 16.5 | Absorption at 400V (A) 19.0 |
| Suction mouth | Suction mouth 3 " | Suction mouth 3 " | Suction mouth 3 " | Suction mouth 3 " |
| Delivery mouth | Delivery mouth 2 "1/2 | Delivery mouth 2 "1/2 | Delivery mouth 2 "1/2 | Delivery mouth 2 "1/2 |
| Pump body | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron |
| Impeller | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No | Check valve No | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 | Degree of protection IP 55 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 600 | Min. flow rate (l./min.) 600 | Min. flow rate (l./min.) 600 | Min. flow rate (l./min.) 600 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 1800 | Max. flow rate (l./min.) 2000 | Max. flow rate (l./min.) 2200 | Max. flow rate (l./min.) 2200 |
| Min. head (m.) | Min. head (m.) 11 | Min. head (m.) 13 | Min. head (m.) 18 | Min. head (m.) 22 |
| Max. head (m.) | Max. head (m.) 16 | Max. head (m.) 18 | Max. head (m.) 23 | Max. head (m.) 32 |
| Jobs | Jobs water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Jobs water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Jobs water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Jobs water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 |
| Height (cm) | Height (cm) 34 | Height (cm) 34 | Height (cm) 34 | Height (cm) 36 |
| Width (cm) | Width (cm) 51.1 | Width (cm) 55.7 | Width (cm) 55.7 | Width (cm) 62 |
| Weight (Kg) | Weight (Kg) 53.2 | Weight (Kg) 58.3 | Weight (Kg) 63 | Weight (Kg) 98.5 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |
